DA200 1 kW Servo Set without brake

1 kW Set Content :

SV-DA200-1R0-2-E0                : 1 KW SERVO DRIVE 220 Volt
SV-MM13-1R0E-2-9A0-1000  : 1 KW SERVO MOTOR WITHOUT BRAKE
DAML-150-05-BB0-00             : ENCODER CABLE 5 MT
DBEL-06-05-B0-0400               : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                   : 23-BIT ABSOLUTE ENCODER
POWER                                 : 1 KW
RATED TORQUE                   : 4.78 NM
MAXIMUM TORQUE            : 14.3 NM
RATED CURRENT                  : 4.8 A
MAXIMUM CURRENT           : 14.4 A
RATED SPEED                        : 2000 RPM
MAXIMUM SPEED                 : 3000 RPM
PROTECTION CLASS             : IP65
OIL SEAL                                 : Available
KEYWAY                                  : Available
FLANGE MEASUREMENT      : 130 mm
SHAFT DIAMETER                  : 22 mm
LENGHT WITHOUT SHAFT   : 143 mm
LENGHT WITH SHAFT           : 198 mm

Attention ; Lowest power servo in our webshop is 400 watt

    - 1 KW Servo Set With brake >

    - 1 KW EtherCAT Set >

    - Suitable gearbox for this motor (1 KW) >

    - One size higher servo (1.5 KW) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 1 KW Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)