DA200 1000 watt Servo Set with brake

1 kW Set Content :

SV-DA200-1R0-2-E0        : 1000 WATT SERVO DRIVES
SV-MM13-1R0E-2-9A2-1000  : 1 KW SERVO MOTOR WITH BRAKE
DAML-150-05-BB0-00       : ENCODER CABLE 5 MT
DBEL-06-05-B0-400        : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE           : 23-BIT ABSOLUTE ENCODER
POWER                  : 1000 watt
Brake Voltage          : 24 VDC
RATED TORQUE           : 4.78 NM
MAXIMUM TORQUE         : 14.3 NM
RATED CURRENT          : 4.8 A
MAXIMUM CURRENT        : 14.4 A
RATED SPEED            : 2000 RPM
MAXIMUM SPEED          : 3000 RPM
PROTECTION CLASS       : IP65
OIL SEAL               : Available
KEYWAY                 : Available
FLANGE MEASUREMENT     : 130 mm
SHAFT DIAMETER         : 22 mm
LENGHT WITHOUT SHAFT   : 185 mm
LENGHT WITH SHAFT      : 240 mm

Attention ; Lowest power servo in our webshop is 1000 watt

- 1000 watt Servo Set With brake >

- 1000 watt EtherCAT Set >

- Suitable gearbox for this motor (1000 watt) >

- One size higher servo (1500 watt) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 1 KW Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)