DA200 1.5 kw Servo Set with brake

1.5 kW Set Content :

SV-DA200-1R5-2-E0                  : 1500 WATT SERVO DRIVES
SV-MM11-1R5G-2-9A2-3000   : 1.5 KW SERVO MOTOR WITH BRAKE
DAML-150-05-BB0-00              : ENCODER CABLE 5 MT
DBEL-06-05-B0-400                   : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                     : 23-BIT ABSOLUTE ENCODER
POWER                                   : 1.5 kw
Brake Voltage                        : 24 VDC
RATED TORQUE                    : 5 NM
MAXIMUM TORQUE             : 15 NM
RATED CURRENT                  : 6 A
MAXIMUM CURRENT           : 18 A
RATED SPEED                        : 3000 RPM
MAXIMUM SPEED                 : 4000 RPM
PROTECTION CLASS             : IP65
OIL SEAL                                 : Available
KEYWAY                                  : Available
FLANGE MEASUREMENT     : 110 mm
SHAFT DIAMETER                  : 19 mm
LENGHT WITHOUT SHAFT   : 278 mm
LENGHT WITH SHAFT            : 318 mm

Attention ; Lowest power servo in our webshop is 1500 watt

- 1500 watt Servo Set With brake >

- 1500 watt EtherCAT Set >

- Suitable gearbox for this motor (1.5 kw) >

- One size higher servo (2 kw) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 1.5 KW Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)