3 kW invt servo without brake

3 kW Set Content :

SV-DA200-3R0-4-E0                : 3 KW SERVO DRIVE 220 Volt
SV-MM13-3R0E-4-9A0-1000  : 3 KW SERVO MOTOR WITHOUT BRAKE
DAML-150-05-BB0-00            : ENCODER CABLE 5 MT
DBEL-06-05-B0-400                : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                : 23-BIT ABSOLUTE ENCODER
POWER                              : 3 KW
RATED TORQUE               : 14.3 NM
MAXIMUM TORQUE         : 42 NM
RATED CURRENT               : 13.6 A
MAXIMUM CURRENT        : 40.8 A
RATED SPEED                     : 2000 RPM
MAXIMUM SPEED               : 3000 RPM
PROTECTION CLASS           : IP65
OIL SEAL                                : Available
KEYWAY                                 : Available
FLANGE MEASUREMENT     : 130 mm
SHAFT DIAMETER                 : 22 mm
LENGHT WITHOUT SHAFT   : 207 mm
LENGHT WITH SHAFT           : 262 mm

Attention ; Lowest power servo in our webshop is 3 kw

    - 3 KW Servo Set With brake >

    - 3 KW EtherCAT Set >

    - Suitable gearbox for this motor (3 KW) >
    - One size higher servo (4.4 KW) >

    - İnvt servo Main Page -

    - İnvt Main Page -

    + 3 KW Servo motor drawings (pdf)

    + İnvt DA200 Servo user manual >

    + İnvt servo error codes and solutions >

    + Servo instolation and useful documents >

    + İnvt servo PC software (zip)