PLIO07

PLIO07 belongs to JMobile-Generation Modules and serves as 2 relay outputs module. Its role depends on the host-panel generation and the connection actually used in the cabinet.

For PLIO07, check 2 relay outputs module against the exact host-panel configuration. Match its complete code, port and option slot to that installation.

What matters on the installed machine?

PLIO07 serves as 2 relay outputs module. Check the actual connector or mounting position and the host-panel generation before selecting it.

Compare PLIO07 (2 relay outputs module) with PLCM01 (CAN communication module); similar connectors do not establish the same duty. Test the function after installation on the running system.

Before changing PLIO07, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.

For PLIO07, confirm that the host supports 2 relay outputs module. Match the part code with the host’s option or mounting requirements. PLCM01 may serve another function despite a similar connector. PLIO07 is a two-relay-output eX700 option; match output duty, host slot and the signal behavior expected by the application.

Around PLIO07, compare PLCM02 (KNX / EIB TP communication module), PLCM03 (RS-232 communication module) and PLCM04 (isolated RS-422 / RS-485 communication module). Check each complete code and connection on its own page.

PDF manuals

Documents include EXOR 2015 archive catalogue. For PLIO07, match 2 relay outputs module details against JMobile-Generation Modules PDF Manuals.