Alpha AL2-ASI-BD

The Mitsubishi Alpha AL2-ASI-BD AS-i Interface Board is a communication module designed to extend the functionality of the Alpha 2 Smart Relay series, specifically for use with the AL2-14MR and AL2-24MR controllers. It enables these controllers to communicate over an Actuator Sensor Interface (AS-interface) network, making them part of a larger, decentralized automation system. Here’s an overview of the key features and specifications from an electrical technician's perspective:

Key Features:

    AS-i Network Integration: The AL2-ASI-BD module connects directly to the main body of the Alpha 2 controller, transforming it into a slave station within an AS-interface network. This allows the controller to communicate with other devices on the network and share data across the system.

    4 Input/4 Output Configuration: The interface supports 4 inputs and 4 outputs, providing a straightforward method for the Alpha 2 controller to interact with sensors and actuators on the AS-interface network.

    Decentralized Control: The AS-interface network allows for decentralized control, meaning that multiple slave stations (up to 31 devices) can be connected to a single master controller. This makes it easier to expand and manage complex automation systems, where multiple devices communicate through a single network.

    Power and Communication Over the Same Bus: Power for the AS-interface communication is supplied over the AS-interface bus, simplifying the wiring setup. The communication signal is superimposed on the power line, reducing the need for additional cables and infrastructure, making it easier to install and maintain.

Slave Address Setting and Diagnostics:

    Address Configuration: The AL2-ASI-BD module requires a unique address to be assigned within the range of 1 to 31. This address is set via the AS-interface master module. New modules are preset to address 0 from the factory and must be reset before being integrated into a new AS-interface network.

    Diagnostic Functions:
        Communication Defect Error (M6): This error occurs when there is a communication issue between the slave and the master. To resolve this, check the connections to the AS-interface master module and ensure that the slave station number is correctly set.
        Communication Power Supply Error (M7): This error signals a problem with the power supply for communication over the AS-interface bus. Technicians should inspect the connections and functionality of the AS-interface power supply and verify the bus cable connections.

AS-i Communication Advantages:

    Decentralized Control: The use of the AS-interface network allows for decentralized control, enabling each Alpha 2 controller to function as a smart, independent node within a larger system. This reduces the complexity of wiring and makes it easier to expand the system by adding new devices.

    Flexible Expansion: Up to 31 slave stations can be connected to a single AS-interface master module, allowing for significant expansion of the automation system without the need for complex wiring or additional control infrastructure.

Applications:

    Manufacturing Lines: The Alpha 2 controllers equipped with the AL2-ASI-BD module can be used in manufacturing environments where sensors and actuators need to communicate with a central control system.

    Building Automation: The AS-interface network can be used for decentralized building automation, where each Alpha 2 controller manages a specific part of the system (e.g., lighting, HVAC, security), all connected through a single AS-interface network.

    Process Automation: In industries where process control is essential, the Alpha 2 controllers can communicate with various sensors and actuators across a plant, ensuring accurate and reliable control of different processes.

Technical Specifications Summary:

    Controller Compatibility: The AL2-ASI-BD is compatible with the AL2-14MR and AL2-24MR controllers from the Alpha 2 series.
    Addressing: Slave addresses range from 1 to 31, and the module is factory-set to address 0.
    Input/Output Configuration: 4 inputs and 4 outputs are supported per AS-interface slave.
    Network Capacity: Up to 31 slave stations can be connected to the AS-interface network, all powered and controlled via the AS-interface bus.

The Alpha AL2-ASI-BD AS-i Interface Board is a valuable expansion for the Alpha 2 series controllers, allowing them to be integrated into AS-interface networks for decentralized control. This interface simplifies wiring and communication while providing flexible options for expanding automation systems in manufacturing, building automation, and process control environments. With straightforward installation and the ability to manage up to 31 slave stations, it enhances the overall capability of the Alpha 2 controllers.

>> Alpha AL2-ASI-BD User manual (pdf)

----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Alpha AL2-ASI-BD and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 02.09.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."