MICREX-SX SPH — NP1PM-048RN / NP1PM-048E / NP1PM-256E

NP1PM codes: 048RN and 48E/256E span different generations

NP1PM appears on more than one Fuji CPU generation. Fuji’s newer SPH2200 lineup lists NP1PM-048RN, while the earlier SPH2000 table lists NP1PM-48E and NP1PM-256E. A similar “048” does not establish project or connection compatibility. See MICREX-SX SPH for the family context.

Keep memory and speed figures with their generation

Fuji gives the newer SPH2200 a basic sequence-instruction time of 12 ns or more; its 048EN variant has 48K program steps. The earlier SPH2000 table lists 49,152 steps for NP1PM-48E and 262,144 steps for NP1PM-256E, with 30 ns or more per basic instruction. Do not carry those older figures over to NP1PM-048RN. Instruction time is not the whole-program scan time.

Migration checks

Compare system definitions, resource settings and network modules before moving an older project. Fuji describes migration tools and logging for SPH2200/3300, but that is not a guarantee of an intervention-free conversion for every installation. The SPH2200/3300 page covers the newer generation; Fuji PLC CPUs separates other basic units. PLC software and CPU documents guide project and manual selection.

Check the full NP1PM nameplate, installed modules and program backup before selecting a spare from the shared prefix alone.

Fuji describes logging on the newer SPH2200 for collecting user-memory data at selected times. Do not assume an older SPH2000 data-logging arrangement will run with the same settings. Confirm the Ethernet port’s assigned job and the system resources in the actual project.