Analog output modules

SPH analog outputs

An analog-output board sends a variable command from PLC to drive or valve. Its signal direction differs from a measuring input.

How the models differ

NP1AY02-MR is two-channel/10-bit and NP1AYH2-MR two-channel/14-bit. H4V/H4I and H8V/H8I distinguish voltage/current and channel count. Model-level technical differences are explained on their own page.

What to check on site

Output range, the receiver’s selected input and PLC scaling must agree; channel count alone is insufficient.

For CPUs and other hardware, see Fuji PLC; for exact-code document titles, see PLC module manuals. PLC engineering tools have their own Fuji PLC software section; the hardware module is not a software licence or installer.


Refine Search