ME1AD8HAI-Q

ME1AD8HAI-Q is a High-Speed Analog-to-Digital Converter (A/D) module in Mitsubishi's MELSEC-Q series, designed for applications requiring fast and accurate data acquisition.

    Channel Configuration: Provides 8 analog input channels.
    Input Signal Types:
        Voltage Input: Accepts a range of ±10V, 0-10V, or 0-5V, suitable for various industrial sensors.
        Current Input: Supports 4-20mA input, widely used in industrial automation.

    Conversion Speed:
        High-Speed Mode: Performs conversions at a rate of 20 µs per channel.
        Standard Mode: Conversions are done at 80 µs per channel, allowing for more precise measurement.

    Resolution:
        Supports 16-bit resolution, providing high accuracy and detail in analog data conversion.
    Isolation: Channels are isolated to reduce noise and interference from external sources.
    Error Detection: Includes diagnostics for error detection and warning output, facilitating reliable operation.

Installation and Configuration Notes

    Grounding: Proper grounding is essential to reduce noise and maintain data integrity.
    Configuration: Use GX Configurator-AD software to set input ranges, gain, and offset values.
    Calibration: Regular calibration is recommended, especially in environments with temperature variations, to ensure consistent accuracy.

The ME1AD8HAI-Q module is ideal for applications requiring high-speed, accurate data acquisition across multiple channels, commonly used in monitoring, control, and automation systems.



>> Mitsubishi ME1AD8HAI-Q User manual (pdf)

  ----------

+ Mitsubishi Automation Homepage

+ Mitsubishi Electric Contact (for Automation Mall)

+ About Mitsubishi Electric

Reminder: Mitsubishi ME1AD8HAI-Q and other Mitsubishi PLC modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 07.12.2012 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."