MD00G-04

MD00G-04 is an operator panel identified by its complete hardware code in the UniOP MD family. Its project handles machine status, alarms and controls; replacement depends on the nameplate and connections as well as the visible screen.

Match the supply, port layout and cabinet cut-out of MD00G-04 against its nameplate and technical drawing. Compare connector orientation and mounting dimensions with the installed panel.

UniOP MD covers legacy text displays. Applications using a 20 mA current loop require separate evaluation when moving from MD00 to ePAD03/04; check nameplate, ports, hardware revision and project backup together. Use the complete MD00G-04 code when selecting within this family.

What matters on the installed machine?

The display arrangement of MD00G-04 must be checked on the installed nameplate and front panel. Compare MD00R-02 (2×20 character LCD; key-operated) before deciding on a substitute. Matching a plug does not preserve the operator’s screen and key layout.

For MD00G-04, verify the Designer / Designer 6 release, protocol option and whether the archived project opens. A related code such as MD00R-02 does not establish the same software target.

Record the current display behavior before changing MD00G-04. A working replacement should preserve the operator's alarm acknowledgement, data-entry sequence and communication timing, as well as the physical fit in the cabinet.

Around MD00G-04, compare MD00R-04 (4×20 character LCD; key-operated), MD01R-02 (2×20 character LCD; key-operated) and MD02F-02 (2×20 character vacuum fluorescent display; key-operated). Check each complete code and connection on its own page.

PDF manuals

Documents include UniOP Installation Guide v1.08, ePAD03 / ePAD04 technical sheet, UniOP OEM installation guide. For MD00G-04, match the full code and hardware period against UniOP MD PDF Manuals.