MICREX-SX SPH — SPH2200 / SPH3300
SPH2200 and SPH3300: a newer MICREX-SX CPU generation
SPH2200 and SPH3300 are Fuji MICREX-SX CPU choices for different duties. Fuji positions SPH2200 for monitoring and sequence control and SPH3300 for motion control. They are not merely two numbers in a speed race: program type, memory requirement and network connections matter.
Listed models and memory
Fuji lists NP1PM-048EN at 48K program steps in the SPH2200 line. For SPH3300 motion control it lists NP1PU-048EN / 096EN / 128EN / 256EN at 48K, 96K, 128K and 256K steps respectively. Basic sequence-instruction times are 12 ns or more for SPH2200 and 5 ns or more for SPH3300. These are not complete application scan times.
Migration and logging
Fuji describes a logging function that captures user-memory data at selected times and a model-transition tool for older systems. The program, system definitions and resource settings still need testing with the installed rack. NP1PM codes span more than one generation, so read the full suffix. CPUs sit under Fuji PLC basic units, engineering tools under PLC software and manual titles under CPU documents.
Do not assume the same instruction timing or ports as an older MICREX-SX SPH CPU.
Fuji lists USB 2.0 and 10/100BASE-TX Ethernet on the newer line. Treat these as project and network settings, not just physical connectors. The motion-oriented SPH3300 and monitoring-oriented SPH2200 also call for different program and command checks.