Hello,
Main power : 220 vAc
Output : 0.4 Kw
Motor circur : 2.6 Amper
Teco Smart VFD L510
Control Mode: V/F Control +Auto-torque compensation function
Range: 0.01~650.00Hz
Setting resolution
Digital input : 0.01Hz
Analog input : 0.06Hz/60Hz
Setting Keypad : Set directly with▲▼ keys or the VR (Potentiometer) on the keypad
External Input Terminlas: AVI(0/2~10V), ACI(0/4~20mA)input
Multifunction input up/down function
Frequency limit Lower and upper frequency limits
3 skip frequency settings.
Operation set
External terminals: Multi- operation-mode 2 / 3 wire selection, Jog operation
V / F curve setting: 6 fixed curve, One programmable.
Carrier frequency: 1~16KHz(default 5KHz)
Acceleration and deceleration control:
2 off Acc / dec time parameters.
4 off S curve parameters.
Multifunction input: 19 functions (refer to description on group3)
Multifunction analog output: 5 functions (refer to description on group3)
Multifunction output: 14 functions (refer to description on group3)
Main features
Overload Detection, 8 preset speeds, Auto-run, Acc/Dec, Switch (2 Stages), Main/Alt run Command select, Main/Alt
Frequency Command select, PID control, torque boost, V/F start Frequency ,Fault reset, Firemode
Display: parameter/parameter value/frequency/line speed/DC voltage/output voltage/output current/PID feedback/input and
output terminal status/Heat sink temperature/Program Version/Fault Log.
LED Status Indicator: For run/stop/forward and reverse.
Overload Protection: Integrated motor and Inverter overload protection.
Over voltage: Over 410V
Under voltage: Under 190V
Momentary Power Loss: Restart Inverter auto-restart after a momentary power loss.
Stall Prevention: Stall prevention for Acceleration/ Deceleration/ and continuous Run.
Short-circuit: output terminal Electronic Circuit Protection
Grounding Fault: Electronic Circuit Protection
10V Built in Power for an external speed potentiometer
AVI Analog voltage input, Specification : 0~10VDC/ 2-10V
ACI Analog current input, Specification : 0/4~20mA
AO Multi function analog output terminal. Maximum output 10VDC/1mA
AGND Analog ground terminal
Attention please !! All installation work of TECO drives should ONLY be performed by qualified technical personnel. Installation must always be carried out in accordance with the relevant ministry laws or regulations in force (2006/42/EC). Otomasyon AVM does not accept any responsibility for installations and individuals that violate local laws and / or other regulations (for overseas sales). If the instructions given by TECO are not followed, the device may experience problems that are not covered by the warranty. Detailed information on this subject is given in detail in the user manual. For detailed information, you can contact adress teco@otomasyonavm.com.
Teco L510-2P5-H1F-P
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands TECO
- Product Code: L510-2P5-H1F-P
- Availability: 1
-
251.00USD
- Ex Tax: 251.00USD
Related Products
Teco S310 0.75kw
Teco VFD Economy input: 220v Ac output: 0.75 kw Ac motor drive S310 vfd ..
77.00USD Ex Tax: 77.00USD
Teco S310 0-4Kw
Teco Economy input: 220v Ac output: 0.4 kw Ac motor drive S310 vfd Control M..
79.00USD Ex Tax: 79.00USD
0-4Kw panolu hız kontrol cihazı m220
0-4Kw panolu hız kontrol cihazı m220..
146.00USD Ex Tax: 146.00USD
Teco L510-201-H1F-P
Hello, Main power : 220 vAc Output : 0.75 Kw Motor circur : 4.3 Amper Teco Smart VFD L510 Control Mo..
250.00USD Ex Tax: 250.00USD













