INVT VFD Software


INVT VFD software: monitor and compare parameters

INVT Studio is the manufacturer's upper-PC environment for monitoring supported VFDs and reading, comparing and backing up function-code parameters. INVT lists serial Modbus and Ethernet UDP as separate connection methods.

Its serial support list includes CHE100, CHF100A, CHV100A, CHV190, GD35, GD100, GD200, GD300, GD800 and IPE200. The Ethernet list includes CHV100A, CHV190, GD35, GD300, GD800 and GD5000. Even within the Goodrive ranges, check the exact variant and available port.

The software can compare parameter sets, monitor status words and capture waveforms. It does not change a drive's motor power, input-voltage class or safe commissioning limits; return to the VFD families and read the full nameplate.

INVT's product page describes older host-system requirements; verify compatibility with the current PC and drive firmware separately. No installer is hosted on this site, so this page has no download link. VFD document topics route to parameter and alarm manuals. Confirm compatibility and release against the complete device code.