CHV190
CHV190
CHV190 is a drive range dedicated to cranes and hoists. INVT's portal-crane case shows encoder-based closed-loop vector control, Profibus-DP field communication and S-curve acceleration in one crane project. That project configuration should not be read as standard equipment on every CHV190.
On a hoist axis
Motor torque, electrical braking and mechanical-brake timing must be designed together when lifting a load. INVT's example also identifies a regenerative braking unit, braking resistor and motor feedback. GD300-19 is a different crane-drive family; parameter and terminal layouts should not be assumed identical.
Assessing an installed crane
Record the motor nameplate, encoder and brake arrangement, raise/lower cycle and fieldbus in use. The CHV190-220G-4, 160 kW motor and braking-resistor figures in the case belong to that particular crane, not a general selection table.
Software and connectivity
INVT lists CHV190 among the ranges supported by INVT Studio monitoring software over serial connection and Ethernet. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.
Manuals and documents
Find the documentation topics for this equipment group on INVT VFD Documents.
Use INVT user manuals, checking the complete model code.