CHV160A

CHV160A

CHV160A is INVT's dedicated CHV160A range for water-supply and pump control. CHV160A has its own water-supply drive product manual, so CHV160 parameters and terminal assignments cannot be carried over unchanged. Both serve pressure-controlled pump groups, but the A suffix must remain part of the installed unit's full code.

Assessing the system

Read pressure-sensor range and signal, pump-motor voltage/current, contactor staging and any mains bypass together. If the pump group uses sleep, standby-pump or fault-transfer logic, match those functions against CHV160A's own terminal and parameter documentation. Do not assign CHV160's published seven-pump or overload figures to a CHV160A frame without evidence from its own label.

Nearby ranges

GD300-16 is a separate, later HVAC/pump platform. A cabinet replacement requires matching not just motor power, but sensor wiring, relay outputs, controller commands and the operating logic of the water system.

Manuals and documents

Find the documentation topics for this equipment group on INVT VFD Documents.

Use INVT user manuals, checking the complete model code.