CHV100A
CHV100A
CHV100A is INVT's vector-drive family published for 660 V and 1140 V mining/plant systems. The manufacturer's CHV100A catalogue separates -00 standard, -01 two-quadrant, -11 four-quadrant and -31 regenerative arrangements. Those suffixes distinguish power-flow and hardware architecture, not just a software name.
Voltage and regeneration
The catalogue distinguishes three-phase 660 V ±15% and 1140 V ±15% classes, with published range coverage of 22–2500 kW at 660 V and 45–2800 kW at 1140 V. Four-quadrant or regenerative equipment handles braking energy differently. The full CHV100A code is required before asserting that an installation has those functions or a particular output current.
On an installed system
Inspect motor and supply plates, rectifier/inverter modules, braking or energy-feedback path and mining approval markings together. CHV100 is a separate older low-voltage range, not a parameter- or power-module equivalent.
Software and connectivity
INVT lists CHV100A among the ranges supported by INVT Studio monitoring software over serial connection and Ethernet. It reads, compares and monitors drive parameters. See INVT VFD Software for its role; check the installed port and firmware before connecting.
Manuals and documents
Find the documentation topics for this equipment group on INVT VFD Documents.
Use INVT user manuals, checking the complete model code.