MH500
MH500
MH500 is an electro-hydraulic servo system that runs the pump of an injection or die-casting machine in response to pressure and flow demand. It is more than a drive: the servo motor, coupled pump, motor speed/position feedback and oil-pressure sensor work as one hydraulic system. INVT's MH500 application note shows these components together.
Pressure and flow control
Motor speed influences pump flow, while pressure feedback helps control hydraulic force during the machine cycle. INVT describes CAN communication and multi-pump arrangements for MH500. The number of pumps and sensor range on a particular machine cannot be inferred from the range name. MH800 serves the same broad hydraulic field but has a different power and interface range.
Checking an installed machine
Read both drive and motor nameplates, pump displacement, pressure-sensor range, motor feedback and the flow/pressure commands from the machine controller. Injection, holding and return stages place different demands on the system, so use the installed hydraulic circuit before transferring parameters.
Manuals and documents
Find the documentation topics for this equipment group on INVT Servo Documents.
Use INVT user manuals, checking the complete model code.