MH800
MH800
MH800 is an electro-hydraulic servo range for pump flow and oil-pressure control on injection, die-casting and press machines. INVT's MH800 product page gives a 4.4–75 kW range. That range does not mean every MH800 unit shares one supply, motor or pump.
What distinguishes the range
INVT lists Modbus, CANopen and EtherCAT communications, six assignable digital inputs and four digital outputs. These matter when linking the drive to a machine controller and plant network. Pressure and flow control must be considered with the servo motor, oil-pressure sensor and any multi-pump arrangement. MH500 addresses a similar application, but differences in power, ports and software rule out assuming a direct swap.
Information needed for selection
Record the complete drive code and rating plate, motor, pump and pressure-sensor codes, and the machine's communication protocol separately. The published power span is a range-level figure, not the output-current rating of a particular unit.
Manuals and documents
Find the documentation topics for this equipment group on INVT Servo Documents.
Use INVT user manuals, checking the complete model code.