invt servo fault codes

INVT Servo Fault Codes and Alarm Information

This page provides fault-code and alarm documents for INVT DA200, DA180 and DB100 servo drives. When troubleshooting a servo fault, first check the exact drive model and use the corresponding document for that series.

INVT DA200 Servo Fault Codes
INVT DA200 Servo Fault Codes (PDF)
Fault and alarm information for DA200 servo drives, including fault descriptions and basic troubleshooting points.

INVT DA180 Servo Fault Codes
INVT DA180 Servo Fault Codes (PDF)
Alarm and fault-code information for the INVT DA180 servo drive series.

INVT DB100 Servo Fault Codes
INVT DB100 Servo Fault Codes (PDF)
Fault-code and alarm information for DB100 servo systems, including basic checks related to drive operation.

Important checks when troubleshooting servo faults

Similar fault numbers may have different meanings on different servo series. For this reason, troubleshooting should not be based only on the displayed alarm code. The servo drive model, motor model, encoder connection, supply voltage, motor and encoder cables, and mechanical load condition should also be checked.

Before repeatedly resetting a servo alarm, determine the actual cause of the fault. Conditions such as overcurrent, overvoltage, encoder faults, motor overload and excessive position deviation usually require inspection of the electrical or mechanical system rather than only clearing the alarm.

Related INVT Servo Pages

+ INVT Servo Manuals and Documents

+ INVT Servo Systems

+ INVT EtherCAT Servo Systems

+ INVT Servo Sets with Brake

+ INVT Servo Sets Without Brake

+ INVT Main Page


Refine Search