invt witout brake servo

INVT Servo Sets Without Brake - Servo Motors and Drives

INVT servo sets without brake are intended for motion-control applications where the load does not require a mechanical holding brake when the motor stops. They are commonly used on horizontal axes, rotary mechanisms, conveyors, feeding systems and machines where the load will not move dangerously when servo torque is removed.

A complete servo set consists of a compatible INVT servo drive, servo motor, encoder, motor cable and encoder cable. Motor power, rated torque, peak torque, operating speed, load inertia, supply voltage, encoder type and communication interface should all be selected according to the mechanical requirements of the machine.

When should a servo motor without brake be used?

A servo motor without brake does not contain a mechanical holding brake that locks the motor shaft when power is removed. This simplifies the motor and wiring because no separate brake power supply or brake control sequence is required.

Brakeless servo motors are particularly suitable for horizontal positioning axes, rotary applications and mechanisms where the load remains mechanically stable after motor torque is removed.

For vertical axes or applications where the load may move under gravity after power loss, an INVT servo motor with brake may be required.

INVT DA200 servo drive family

The INVT DA200 servo drive family covers approximately 100 W to 55 kW and includes drive and motor options for 220 VAC and 400 VAC systems. The available motor models and feedback options depend on the selected servo series and drive rating.

Position, speed and torque control

DA200 servo systems can be used for position, speed and torque control. High-resolution feedback and advanced servo algorithms allow fast motion and accurate positioning to be combined within the same motion-control system.

2.0 kHz speed response and 23-bit encoder

The DA200 series provides a speed response frequency of up to 2.0 kHz and supports high-resolution 23-bit encoder feedback. These features help reduce settling time during rapid speed changes and improve motor control at low speed.

Internal positioning functions

Supported DA200 drive versions provide up to 128 internal positioning points. Repetitive indexing and positioning sequences can therefore be programmed partly inside the servo drive, reducing the amount of external motion programming required in simple applications.

Electronic cam and synchronized motion

Suitable DA200 models support electronic cam functions for creating programmable motion relationships between master and slave axes. This can be used in winding, cutting, feeding, tracking and synchronized conveyor applications.

Full closed-loop control

Supported drive configurations can use an external load-side encoder or linear measurement system for full closed-loop control. This helps reduce the effect of mechanical backlash, gearbox clearance and transmission elasticity on the actual load position.

Load inertia identification and servo tuning

DA200 servo drives include load inertia identification and tuning functions that help determine the relationship between the motor and mechanical load. Correct gain adjustment can reduce commissioning time and improve motion stability.

Vibration and resonance control

Low-frequency vibration suppression and notch filters can be used to reduce the influence of mechanical resonance on servo motion. Correct tuning according to the actual machine structure is important for obtaining stable operation.

Communication options

Depending on the DA200 version, communication options can include USB, RS485, CANopen, EtherCAT, PROFINET and PROFIdrive. The communication protocol should be selected together with the PLC or motion controller, especially in synchronized multi-axis applications.

Servo drive protection functions

INVT servo drives include alarm and protection functions for operating conditions such as overvoltage, undervoltage, overcurrent, overload, overspeed and excessive position deviation. These functions protect and monitor the servo system, but they do not replace the mechanical and functional safety design of the machine.

Selecting a servo motor without brake

A brakeless servo motor should not be selected according to motor power alone. Rated torque, peak torque, operating speed, load inertia, gearbox ratio, motor flange, shaft dimensions, encoder type and drive compatibility should all be evaluated together.

Using a motor without brake simplifies the system when a holding brake is not required. However, the machine designer must always consider what will happen to the mechanical load when servo torque or mains power is removed.

Typical applications

INVT servo sets without brake can be used in packaging machines, horizontal feeding axes, conveyor systems, winding and unwinding equipment, cutting machines, rotary tables, printing machines, electronic manufacturing equipment and precision positioning systems.

Related INVT Servo Pages

+ INVT Servo Systems

+ INVT EtherCAT Servo Systems

+ INVT Servo Sets with Brake

+ INVT Servo Manuals and Documents

+ INVT Main Page


1 kW invt servo without brake

1 kW invt servo without brake

DA200 1 kW Servo Set without brake1 kW Set Content :SV-DA200-1R0-2-E0     &..

376.00USD Ex Tax: 376.00USD

1.5 kW invt servo without brake

1.5 kW invt servo without brake

DA200 1.5 kW Servo Set without brake1.5 kW Set Content :SV-DA200-1R5-2-E0    &nb..

369.00USD Ex Tax: 369.00USD

2 kw invt servo without brake

2 kw invt servo without brake

DA200 2 kW Servo Set without brake2 kW Set Content :SV-DA200-2R0-4-E0     &..

371.00USD Ex Tax: 371.00USD

3 kW invt servo without brake

3 kW invt servo without brake

3 kW invt servo without brake3 kW Set Content :SV-DA200-3R0-4-E0       ..

370.00USD Ex Tax: 370.00USD

4.4 kw invt servo without brake

4.4 kw invt servo without brake

DA200 4.4 kW Servo Set without brake4.4 kW Set Content :SV-DA200-4R4-4-E0    &nb..

373.00USD Ex Tax: 373.00USD

400 watt invt servo without brake

400 watt invt servo without brake

DA200 400 watt Servo Set without brake400 watt Set Content :SV-DA200-0R4-2-E0    ..

366.00USD Ex Tax: 366.00USD

5.5 KW invt servo without brake

5.5 KW invt servo without brake

DA200 5.5 kW Servo Set without brake5.5 kW Set Content :SV-DA200-5R5-4-E0    &nb..

374.00USD Ex Tax: 374.00USD

750 watt invt servo without brake

750 watt invt servo without brake

DA200 750 watt Servo Set without brake750 watt Set Content :SV-DA200-0R7-2-E0    ..

375.00USD Ex Tax: 375.00USD

Showing 1 to 8 of 8 (1 Pages)