invt servo set with brake

INVT Servo Sets with Brake - Servo Motors and Drives
INVT servo sets with brake are used in industrial motion-control applications where the mechanical load must remain in position when the servo motor stops. The holding brake fitted to the servo motor is especially important in vertical axes, lifting mechanisms, gantry systems, robotic axes and machines where the load must not move after power is removed.
A complete brake-equipped servo system consists of a compatible INVT servo drive, servo motor, encoder and holding brake. Drive power, motor torque, supply voltage, maximum speed, load inertia, encoder type and brake option should all be selected according to the machine application.
What does a servo motor brake do?
The brake mounted on a servo motor is primarily intended to hold the mechanical load in position while the motor is stationary. During normal movement, motor torque and position are controlled by the servo drive. When the axis stops, the brake can engage to help prevent unwanted movement.
This function is particularly important on vertical axes where gravity can move the load downward after motor torque is removed.
A servo holding brake should not normally be used as a dynamic service brake for repeatedly stopping a moving load. Brake release and engagement timing must be coordinated correctly with servo motor torque.
INVT DA200 servo drive family
The INVT DA200 servo drive family covers approximately 100 W to 55 kW and includes drive versions for different voltage classes, including 220 VAC and 400 VAC systems. However, brake-equipped motor availability depends on the motor family, frame size, rated power and complete motor ordering code.
For this reason, a brake-equipped servo motor should not be selected only according to the servo drive power rating.
Position, speed and torque control
DA200 servo systems can be used for position, speed and torque control applications. High-resolution encoder feedback, a speed response frequency of up to 2.0 kHz and advanced tuning functions help provide accurate motion control in demanding machinery.
Full closed-loop control
Supported DA200 configurations can use an external load-side encoder or linear measurement device for full closed-loop control. This arrangement helps compensate for positioning errors caused by mechanical backlash, couplings, gearboxes and transmission components.
Internal positioning functions
Suitable DA200 versions support up to 128 internal positioning points. Simple indexing and repetitive positioning sequences can therefore be handled partly by the servo drive without requiring every movement to be generated externally by the PLC or motion controller.
Brake control on vertical axes
Correct brake timing is critical in vertical motion applications. Before servo torque is removed, the mechanical brake should be engaged. When movement begins, the motor should first generate sufficient holding torque before the brake is released.
Incorrect brake sequencing can cause load drop, mechanical shock, excessive positioning error or servo alarms.
Servo selection for a vertical axis should therefore consider load weight, gearbox ratio, motor holding torque, brake holding capacity, axis direction and machine safety requirements rather than motor power alone.
STO - Safe Torque Off
Suitable DA200 drive versions can be equipped with STO (Safe Torque Off). When STO is activated, the servo drive is prevented from producing motor torque through the safety function.
STO and the servo motor brake perform different functions. STO prevents the motor from generating torque, while the mechanical holding brake helps keep the physical load in position. Especially on vertical axes, these two functions should not be treated as substitutes for each other.
Servo drive protection functions
DA200 servo drives include protection and alarm functions for operating conditions such as overvoltage, undervoltage, overcurrent, overload, overspeed and excessive position deviation. The required stopping and brake sequence following a fault should be determined according to the mechanical structure and safety design of the machine.
Communication options
Depending on the DA200 version, communication options can include USB, RS485, CANopen, EtherCAT, PROFINET and PROFIdrive. The correct communication interface should be selected according to the PLC, motion controller, required axis count and network architecture.
Encoder and brake options
Depending on the servo motor family, INVT offers different feedback technologies such as optical encoders, magnetic encoders or resolvers. Brake and non-brake motor variants are identified separately in the motor ordering code.
When replacing an existing servo motor, selection should therefore be based on the complete motor code rather than only the motor power and flange dimensions.
Typical applications for brake-equipped servo systems
INVT servo sets with brake can be used in vertical-axis machines, packaging equipment, robotic mechanisms, CNC auxiliary axes, gantry systems, lifting and handling equipment, automated storage systems and precision positioning machinery.
When selecting a complete servo set, the motor and drive compatibility, brake supply voltage, encoder type, motor cable, encoder cable and required communication interface should all be checked together.
Related INVT Servo Pages
+ INVT Servo Sets without Brake
1 kW invt servo without brake
DA200 1000 watt Servo Set with brake1 kW Set Content :SV-DA200-1R0-2-E0  ..
372.00USD Ex Tax: 372.00USD
1.5 kW invt servo with brake
DA200 1.5 kw Servo Set with brake1.5 kW Set Content :SV-DA200-1R5-2-E0 ..
377.00USD Ex Tax: 377.00USD
400 watt invt servo with brake
DA200 400 watt Servo Set with brake400 watt Set Content :SV-DA200-0R4-2-E0 &n..
367.00USD Ex Tax: 367.00USD
750 watt invt servo with brake
DA200 750 watt Servo Set with brake750 watt Set Content :SV-DA200-0R7-2-E0 &n..
368.00USD Ex Tax: 368.00USD
