DA200 750 watt Servo Set with brake

750 watt Set Content :

SV-DA200-0R7-2-E0                :  750 Watt SERVO DRIVES
SV-ML08-0R7G-2-9A2-1000   : 750 Watt SERVO MOTOR WITH BRAKE
DAML-075-05-CB0-00             : ENCODER CABLE 5 MT
DBEL-06-05-CD-0400               : POWER CABLE 5 MT


INVT DA200 DRIVE SPECIFICATIONS :

- 1 Faz 220VAC Power Suply
- 10 Input / 6 Output (Programable)
- 3 Analog Input ( 1 point 16bit / 2 point 12bit )
- 2 Analog Output
- USB Input (PC Software)
- RS 485 Standard . CanOPEN, PROFINET, EtherCAT optional .
- Safe Torque Off ( STO ) Optional
- Position Control ,Speed Control, Torque Control Modes
- 2kHZ Speed Response Frequency
- 23 bit absolute encoder
- Full Closed loop function
- Build-in positioner function
- Electronic CAM function
- Linear motor Control
- Online and offline load inertia detection
- Auto/ manuel notch filter
- Gantry control function
- Easy installation with user friendly pc software

DA200 Servo Motor Technical Specifications :

ENCODER TYPE                  : 23-BIT ABSOLUTE ENCODER
POWER                                : 750 watt
Brake Voltage                     : 24 VDC
RATED TORQUE                  : 2.4 NM
MAXIMUM TORQUE           : 7.2 NM
RATED CURRENT                 : 4.5 A
MAXIMUM CURRENT          : 13.5 A
RATED SPEED                       : 3000 RPM
MAXIMUM SPEED               : 5000 RPM
PROTECTION CLASS           : IP65
OIL SEAL                                : Available
KEYWAY                                : Available
FLANGE MEASUREMENT      : 80 mm
SHAFT DIAMETER                  : 19 mm
LENGHT WITHOUT SHAFT    : 186.5 mm
LENGHT WITH SHAFT            : 221.5 mm

Attention ; Lowest power servo in our webshop is 750 WATT

- 750 watt Servo Set With brake >

- 750 watt EtherCAT Set >

- Suitable gearbox for this motor (750 WATT) >

- One size higher servo (1 kw) >

- İnvt servo Main Page -

- İnvt Main Page -

+ 750 watt Servo motor drawings (pdf)

+ İnvt DA200 Servo user manual >

+ İnvt servo error codes and solutions >

+ Servo instolation and useful documents >

+ İnvt servo PC software (zip)