Gd200 user manual

INVT GD200A User Manual and Technical Reference
Working with an INVT GD200A variable frequency drive is much easier when the correct manual is available at the machine. This page provides direct access to the GD200A user manual together with the related OtomasyonAVM technical sections for commissioning, fault diagnosis and drive support.
The GD200A manual is useful not only during the first installation. It should also be kept as a reference when changing motor data, modifying control functions, checking terminal assignments, reviewing protection settings or investigating an unexpected drive alarm.
What You Can Find in the GD200A Manual
The document covers the main subjects required for installation and operation of the drive, including power wiring, control terminals, motor parameters, function codes, operating modes, communication settings and troubleshooting information.
For machines already in service, the parameter descriptions are particularly useful when comparing the current configuration with the original commissioning values. Before changing a parameter, check its function, valid range and whether the change requires the drive to be stopped or powered again.
INVT GD200A User Manual PDF
+ INVT GD200A User Manual (English PDF)
Use the complete model code on the drive nameplate when referring to the manual. Different voltage, power or hardware versions may not use every terminal or option in exactly the same way.
Before Commissioning a GD200A
Before the first run, verify the incoming supply and motor connections and enter the motor nameplate information carefully. A wrong motor current, frequency or speed value can affect motor-control performance and protection functions.
It is also good practice to check:
- Input voltage and drive voltage class
- Motor rated voltage, current, frequency, speed and power
- U, V and W motor wiring
- Protective earth connection
- Digital input and relay assignments
- Analog command and feedback signals
- Acceleration and deceleration times
- Required control mode for the application
When the Drive Displays a Fault
If the GD200A stops with a fault message, record the displayed code before resetting the drive. The fault code, motor condition and machine state at the moment of the trip usually provide more useful information than repeatedly clearing the alarm.
For model-specific troubleshooting, use the INVT GD200A fault codes section.
Related INVT GD200A Resources
+ INVT User Manuals and Technical Documents
+ INVT Commissioning and Application Notes