ML510
ML510
ML510 is a drive–motor servo system built to control a machine spindle. It regulates spindle speed, supports stable speed changes and uses position feedback. Describing it only as a “servo motor” misses the drive, matched motor, feedback device and commands from the machine controller that make up the working axis.
Published drive choices
INVT’s ML510 table shows nine drive codes in a three-phase 380 V AC ±15% supply class. Its average / maximum output-current figures are ML510-A33110PA-R13 at 11 / 25 A with a 5.5 kW motor class; A33150PA-R13 at 15 / 38 A and 7.5 kW; and A33300PA-R13 at 30 / 64 A and 15 kW. The 18 kW A33400PA-R13 and A33400SC-R13 versions are shown at 40 / 95 A, while the 25 kW A33550PB-R13 and A33550SC-R13 versions are shown at 55 / 113 A. A33750SC-R13 is listed at 75 / 170 A for 35 kW, and A33950SD-R13 at 95 / 212 A for 45 kW. These are published drive options, not the actual current, torque or speed of an unidentified installed motor.
Connections and setup
The ML510 description identifies simplified wiring terminals, resolver position feedback and differential encoder-signal reception. Setup can use the drive’s LED interface, an external HMI or PC software. Fanless natural-convection drives and oil-cooled motors are available as options; they are not necessarily standard on every ML510 unit.
Replacing a spindle axis
Record the full A33… drive code, motor power–speed–torque nameplate, resolver and encoder cables, cooling method, braking arrangement and the machine controller’s command type. MH600 is a different servo range; DB100 / SV-DB100 follows other drive–motor pairings. For manual and document topics for this equipment group, open INVT Servo Documents.
Manuals and documents
Find the documentation topics for this equipment group on INVT Servo Documents.
Use INVT user manuals, checking the complete model code.