Hello,
Wellcome inovance H0U 88B1G, PLC + HMI product page,
Communication Ports
The
H0U series PLC has four communication ports as standard configuration.
COM0, COM1 and COM2 are standard RS485 communication interfaces. COM0 is
used for user program downloading, commissioning and monitoring. COM1
and COM2 are free interfaces and support the Modbus protocol, N:N
protocol, parallel protocol, HMI protocol, Inovance H0U Series PLC User Manual Page 7 of 14
PC link protocol, RS instruction and Modbus instruction. The other one is USB interface, which has the same function as COM0.
Power Supply Specification inovance H0U 88B1G
The H0U series PLC adopts the DC/DC power supply.
The
input voltage of the DC/DC power supply is 24 V. The outputs are
+5V/+24VDD/GND and +5V/COM respectively. +5V/+24VDD/GND provides power
supply to the digital circuits and relays of the H0U, while +5V/COM
provides power supply to transistor in the mixed output.
The DC/DC power supply adopts self-excitation to generate pulse width modulation (PWM)
square wave and uses TL431 for feedback. The power supply voltage of the main circuit is
+5V/GND.
The following table describes the power supply specification of the H0U series PLC
Table 4 Power supply specification of the H0U series PLC
Input Specification
For
the X terminals, the rated input voltage is 24 VDC. Relative to COM
(0V), the X terminals is OFF when the input voltage is below 4.0 V, is
ON when the input voltage is
above
15.0 V and is not fixed when the input voltage is 4.0–15.0 V. On the
condition of rated input voltage of 24 VDC, the input current is 4–6 mA.
Display area: 192 x 64 LCD type Yellow green background, dark blue character
Background light: Yellow green LED background light
Language: English/Chinese
Physical dimensions: 130 x 65 mm
Display size: 104 x 39 mm
Power supply: 3.3 V
Storage: Flash 56 KB
+ inovance programming software
Editor's note: Friends Inovance H0U Series has been a model that has worked under the toughest conditions for many years with zero problems. However, it is now discontinued due to the release of a new series. We do not recommend the H0U products on our website for your new projects. It has now entered the spare part class.
Attention please !! All installation work of INOVANCE PLC drives should ONLY be performed by qualified technical personnel. Installation must always be carried out in accordance with the relevant ministry laws or regulations in force (2006/42/EC). Otomasyon AVM does not accept any responsibility for installations and individuals that violate local laws and / or other regulations (for overseas sales). If the instructions given by INOVANCE are not followed, the device may experience problems that are not covered by the warranty. Detailed information on this subject is given in detail in the user manual. For detailed information, you can contact adress inovance@otomasyonavm.com. (Contact 004)
inovance H0U 88B1G
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands INOVANCE
- Product Code: H0U 88B1G
- Availability: 1
-
1.00USD
- Ex Tax: 1.00USD
Related Products
Siemens SIPART DR21
Hello, Wellcome to our Siemens SIPART DR 21-PROCESS CONTROLLER SIPART DR21 Module page&n..
228.00USD Ex Tax: 228.00USD


