Hello dear colleagues,

The IEC 60947-2 standard is an integral part of the IEC 60947 series, which focuses on the specifications for low-voltage switchgear and controlgear. Specifically, IEC 60947-2 deals with circuit-breakers, providing guidelines on their design, use, and testing to ensure safe and reliable operations.

Title: Low-voltage switchgear and controlgear - Part 2: Circuit-breakers.

Purpose

The IEC 60947-2 standard specifies requirements for circuit-breakers used in industrial and commercial applications. These devices are essential for protecting electrical circuits from damage caused by overloads, short circuits, and fault conditions by interrupting the flow of electricity.

Scope

This standard covers a broad range of aspects including:

    Design and Construction: Guidelines for mechanical and electrical design to ensure robustness and functionality.
    Operating Conditions: Defines the environmental conditions under which circuit-breakers must operate reliably.
    Performance Ratings: Specifications for voltage, current, frequency, and interruption capacity to ensure they meet safety and operational requirements.
    Safety Features: Requirements to ensure protection against electrical and mechanical hazards.

Key Sections

    General Requirements: Sets out definitions, classifications, and general requirements that apply to all circuit-breakers covered by this standard.
    Rated Characteristics: Details about rated operational voltages, currents, breaking capacities, and other critical performance parameters.
    Construction Requirements: Specifies the materials and construction techniques to ensure durability and safety.
    Testing Requirements: Protocols for testing electrical endurance, mechanical operations, and compliance with safety standards.
    Installation and Maintenance: Guidance on proper installation, operation, maintenance, and troubleshooting to extend the life of circuit-breakers and enhance safety.

Safety Features

    Protection Mechanisms: Includes various protective features such as thermal or magnetic trip units to prevent damage from overloads and short circuits.
    Arc Management: Techniques to control and extinguish electrical arcs generated during the interruption of current to enhance safety and equipment longevity.
    Lockout/Tagout Capability: Facilities for securing the breaker in an off position to ensure safety during maintenance operations.

Applications

The IEC 60947-2 standard is essential for multiple sectors where circuit protection is critical, including:

    Industrial Plants: For protecting machinery and reducing downtime caused by electrical faults.
    Commercial Buildings: Ensuring safety and continuity of power in structures such as shopping centers, office buildings, and hotels.
    Infrastructure Systems: Used in systems such as transportation networks and utility grids to prevent catastrophic failures and ensure reliable service delivery.

IEC 60947-2 is a vital standard ensuring that circuit-breakers meet rigorous safety and operational standards. By adhering to this standard, manufacturers and engineers can guarantee that their circuit-breakers are capable of protecting electrical systems efficiently and safely. This standard not only ensures the safety of people and property by preventing electrical hazards but also supports the reliability and efficiency of electrical installations across various industries. Compliance with this standard plays a critical role in maintaining system integrity and promoting the safe and efficient operation of electrical networks.

IEC 60947 is a series of standards set by the International Electrotechnical Commission (IEC) for low-voltage switchgear and controlgear. This standard specifies the design, construction, performance, and testing criteria for electrical control devices used in industrial applications. It covers the general characteristics of these devices which are critical for safety and reliability, and is widely accepted internationally.

 IEC 60947-1: General Rules

 IEC 60947-2: Circuit Breakers

 IEC 60947-3: Switches, Disconnectors, Switch-disconnectors, and Fuse-combination units

* These questions generally include the ones that may come to mind for many people regarding the "IEC Industry Standards" topic. Each user or student will have their specific questions depending on a particular situation or application. The answers are not binding and do not express absolute certainty. "There is no objection to sharing our article above, citing it as a source". Automation Mall Community 03.2022

++ Control Devices main menu 

++ Homepage