IC697CHS783
VME Integrator Racks, 17 Slot Front and Rear Mount (IC697CHS782/783)
The IC697CHS783 is a 17-slot VME integrator rack designed for use with the IC697 Programmable Logic Controller (PLC). This rack is compatible with 3rd party VME modules and IC697 CPU and I/O modules. It's ideal for systems that require flexibility in integrating both types of modules.
Key Features:
Compatibility: Supports 3rd party VME modules with 0.8-inch spacing and all IC697 PLC module types.
Mounting Options:
Rear-mount: Fits into a 10-inch (254 mm) deep enclosure.
Front-mount: Fits into a standard 19-inch (483 mm) rack.
Power Supply Support: Accepts AC/DC and DC IC697 power supplies or external supplies (Power Supply Adaptor module required).
Dual Rack Operation: You can operate two racks using a single power supply.
High-Current Configurations: Designed to support high-current applications with appropriate power supply configurations.
Optional Accessories:
J2 backplane additions.
Ribbon cable connections for J2 backplanes.
Optional fan assembly for high-power modules.
Functions:
The VME Integrator Rack is designed to accommodate both 3rd party VME modules and IC697 CPU/I/O configurations, except for redundancy applications. The backplane has 17 slots spaced at 0.8 inches to fit VME modules. IC697 modules take up two slots each, as they require 1.6-inch spacing.
Module Configuration Options:
You can install 17 3rd party VME modules (no IC697 modules).
Nine IC697 modules can be installed.
Or, a combination of IC697 and 3rd party VME modules.
Note: A maximum of three VME modules can be used in a rack with IC697 modules due to power limitations.
Flexibility: The rack supports both types of modules through adjustable jumpers on the backplane. These jumpers can be reconfigured depending on the VME module requirements.
Power Supply Sharing: Two racks can share a single power supply, with the Power Supply Extension Cable (IC697CBL700) available for such configurations.
Power Connections: The backplane includes +5V, +12V, -12V, and 0V power connections. However, these are not intended for direct connection to external 3rd party power supplies.
Rack Dimensions:
Height: 11.15 inches (283 mm)
Width: 19 inches (483 mm)
Depth: 7.25 inches (184 mm)
Slot Width: Each slot is 0.8 inches wide, except for the power supply slot, which is 2.4 inches wide.
No jumpers or DIP switches are needed for addressing I/O modules in this rack, as it includes automatic slot sensing.
>> GE Fanuc IC697CHS783 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)