IC697ACC736

Cable Shield Clamping Assembly (IC697ACC736)

The Cable Shield Clamping Assembly (IC697ACC736) is designed to improve Electromagnetic Compatibility (EMC) immunity for shielded cables used in IC69 PLC products*, especially in harsh industrial environments. This assembly provides a secure and effective method for grounding shielded cables, ensuring better protection against electromagnetic interference.

    Enhanced EMC Immunity: Improves protection against electromagnetic interference in industrial settings.
    Suitable for Harsh Environments: Designed specifically for installations in severe industrial environments.
    Compatible with All IC69 PLC Products*: Can be used across the entire IC69* PLC product range.
    Easy Assembly: Simple to install and use, with all necessary parts included.
    Versatile Mounting Options: Can be mounted on a panel, a rack enclosure, or directly onto an IC697 rack.

Package Contents

    One Ground Plate: For grounding shielded cables.
    Six Cable Clamps: To secure cables to the ground plate.
    Four #6 Self-Tapping Screws: For mounting the assembly securely.

Functionality

The Cable Shield Clamping Assembly ensures the grounding of shielded cables by using the included ground plate and clamps. This is especially critical in industrial environments where high levels of electromagnetic interference (EMI) may be present. Grounding the cable shields properly helps in reducing noise and protecting the system from electrical disturbances.


Mounting and Installation

    Location: The ground plate should be mounted near the PLC rack, whether it’s for IC697 or IC693 installations. It provides both mechanical relief for the cables and electrical grounding for the shields.
    Cable Clamp Usage: To secure a cable, slide the clamp into two adjacent slots on the ground plate. Remove the required section of the cable's outer cover, place the cable between the clamp and the ground plate, and tighten the thumbscrew.
        Note: Avoid overtightening the thumbscrew. It should be hand-tightened or lightly tightened with a tool to avoid damaging the cable.
    Mounting Surface: If installing the ground plate on a painted surface, ensure the paint is removed from the mounting area to establish a good electrical ground connection.

Dimensions and Mounting Requirements

    Ground Plate Dimensions:
        Length: 19.00 inches (483 mm)
        Width: 4.25 inches (108 mm)
    Mounting Hole Diameter: 0.250 inches (6.35 mm) (two holes)
    Cable Clamp: Six clamps are included in the assembly, and additional clamps are available for purchase under catalog number IC697ACC737 (package of 12).


Additional Notes

    The assembly is designed for ease of installation, with clear mounting guidelines and minimal requirements for specialized tools.
    Proper grounding is essential for ensuring the long-term reliability and functionality of PLC systems, especially in environments with significant electromagnetic interference.

This assembly is an essential accessory for installations that demand higher EMC immunity, ensuring that shielded cables are properly grounded and secured.

>> GE Fanuc IC697ACC736 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC697ACC736 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."