IC695PSD040
IC695PSD040: Reliable 24V DC Power Source
If you need a 24V DC power supply, the IC695PSD040 has got you covered. Delivering 40 watts of power, this unit operates within an input voltage range of 18 to 39 VDC, ensuring stable operation for your system. Compact but functional, it provides +5.1V and +3.3V outputs for your modules and a +24V DC output for relays. It takes up just one slot, making it a space-efficient and easy-to-use solution.
Technical Details:
Input Voltage: Operates within 18-30 VDC (during run) and 12-30 VDC (during startup). It’s designed to work with low-voltage DC power sources.
Output Power:
+5.1 VDC (up to 30W): Powers the brain modules of your system.
+3.3 VDC (up to 30W): Supplies power to RX3i modules.
+24 VDC relay output: Powers relay modules to support switching operations.
Load Capacity: Maximum output power depends on ambient temperature, with full power available up to 40°C.
Capacity Considerations: If the number of modules exceeds this power supply’s capacity, you’ll need to use expansion or remote backplanes.
Isolation: None. This device is not isolated, meaning it’s not compatible with floating or positive-grounded systems.
Ripple & Noise: All outputs maintain a low ripple and noise level of 50 mV, ensuring stable and clean power delivery.
Protection:
Overload Protection: The 5.1V output is limited to 7 Amps, and the 3.3V output is limited to 10 Amps. In case of an overload, the power supply shuts down and will continue trying to restart until the condition is resolved.
Internal Fuse: A built-in fuse protects against severe internal faults, though the power supply usually shuts down before the fuse blows.
LED Indicators:
Power (Green/Amber): The green LED lights up when power is being supplied to the backplane, and the amber LED indicates that power is applied but the power supply switch is off.
P/S Fault (Red): Lights up when the power supply fails and is no longer delivering sufficient voltage.
Over Temperature (Amber): Activates when the power supply is overheating.
Overload (Amber): Lights up when one of the outputs is near or exceeding its maximum load.
Connections:
The +24V and -24V terminals accept 14 to 22 AWG wires. When using the same DC power source for multiple power supplies, make sure to match the polarity across all units to avoid potential damage or injury.
The IC695PSD040 is a reliable 24V DC power supply that ensures stable and efficient operation for your RX3i system. Its compact design, combined with high energy efficiency and low ripple, makes it ideal for powering sensitive modules. When you need a dependable power source, this one is hard to beat.
>> Pac IC695PSD040 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)