IC695ETM001
The Ethernet Interface Module, IC695ETM001, provides connectivity between the PACSystems RX3i controller and an Ethernet network, enabling communication with other PACSystems equipment, Series 90, and VersaMax controllers. This module is essential for managing TCP/IP communications with other PLCs, computers running programming software, and host computers using the GE Fanuc SRTP and Ethernet Global Data (EGD) protocols.
Key Features:
Full PLC Programming and Configuration: Offers complete programming services for PACSystems via Ethernet.
Ethernet Global Data (EGD): Facilitates periodic data exchanges between devices using the Ethernet Global Data protocol.
TCP/IP Services via SRTP: Ensures reliable communication using GE Fanuc’s Service Request Transport Protocol (SRTP).
Advanced Diagnostics: Provides comprehensive station management and diagnostic tools, with built-in support for online supervisory access.
IEEE 802.3 Support: Includes 10/100 Mbps Ethernet ports for seamless integration into standard network environments.
Auto-Sensing and Switching: Features auto-negotiation for speed, duplex mode, and cable type, allowing connection to network switches, hubs, or repeaters without manual configuration.
Specifications:
Processor Speed: 200 MHz Ethernet processor.
Ports: Two auto-sensing 10/100 Mbps Ethernet ports (RJ-45) and one RS-232 Station Manager port.
Ethernet Media Support: Supports both 10BaseT and 100BaseTX Ethernet media, including the ability to daisy chain Ethernet nodes with the embedded switch.
LAN Support: Implements IEEE 802.3 CSMA/CD access with Logical Link Control for up to 100Mbps network speeds.
Station Manager:
The Station Manager is an onboard tool offering interactive commands for monitoring and controlling the Ethernet Interface. Accessible either through the serial port or via the Ethernet network, it supports diagnostics and configuration, including password protection for critical commands.
Firmware Upgrades:
Firmware updates are performed using the WinLoader utility, loaded through the PLC CPU. This ensures that the Ethernet Interface remains up to date with the latest features and performance improvements.
Ethernet Global Data (EGD):
The module supports up to 255 EGD exchanges, providing robust data exchange capabilities over the network. It can produce and consume data across multiple devices, including both selective consumption and broadcast configurations.
Controls and Indicators:
Ethernet OK (EOK) LED: Indicates module status, flashing for errors.
LAN OK LED: Blinks during network activity and remains solid when the physical network is connected.
Log Empty LED: Turns off when an event has been logged.
Network Activity LEDs (LINK): Show link status and activity for each Ethernet port.
Speed LEDs (100Mbps): Indicate whether the port is operating at 100Mbps (on) or 10Mbps (off).
Ethernet Restart:
A manual restart button is available to restart the Ethernet firmware without cycling power to the entire system.
This module is essential for applications requiring high-speed communication, remote diagnostics, and network management in industrial automation environments.
>> IC695ETM001 input modules User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)