IC694PWR331
IC694PWR331: High Capacity 24V DC Power Supply
If your system’s power demands are increasing, the IC694PWR331 is the high-capacity solution you need. Capable of delivering up to 30 Watts, this power supply operates within an input voltage range of 12 VDC to 30 VDC. Ideal for applications that require more +5 VDC output than a standard supply (PWR321) can provide, this unit can handle it all. While it can maintain all outputs with input voltages as low as 12 VDC, it requires 18 VDC to start up.
Technical Details:
Input Voltage: Operates within a range of 12-30 VDC, but requires 18 VDC for startup.
Output Power:
+5 VDC (up to 30W): Delivers a nominal 5.1 VDC with a maximum of 7 Amps.
+24 VDC Relay Output (up to 15W): Used to power relay circuits.
Isolated +24 VDC (up to 20W): Can be used for external devices or modules.
Total Power: Maximum of 30 Watts shared across the three outputs.
Protection Features:
Overcurrent Protection: The +5V output is limited to 7 Amps. If an overload or short circuit occurs, the power supply shuts down and will automatically restart once the issue is cleared.
Internal Fuse: A 5 Amp fuse is installed to protect against internal faults.
Isolation: Provides 1500 VAC isolation between input and backplane for one minute, reducing the risk of short circuits.
Ride-through Time: In case of a power interruption, the supply maintains valid outputs for at least 10 milliseconds.
LED Indicators:
PWR (Green): Lights up when the power supply is functioning correctly. Turns off if a power supply fault occurs.
OK (Green): Indicates that the PLC is operating properly. Turns off if an issue is detected.
RUN (Green): Lights up when the PLC is in Run mode.
Connections:
The power connections must be polarity-sensitive. The positive (+) wire connects to the top terminal, and the negative (-) wire connects to the second terminal. The isolated +24V output can be used to power external circuits. However, keep in mind that if the output is overloaded, the PLC will stop functioning.
Summary:
The IC694PWR331 is a reliable, high-capacity 24V DC power supply for RX3i systems. It’s perfect for applications that need higher +5V DC output. With its wide input voltage range, robust protection features, and multiple outputs, it provides the stability and flexibility your system requires. Thanks to its overcurrent protection and internal fuse, your system will stay safe while running efficiently.
>> IC694PWR331 Power modules User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)