IC694MDL740

IC694MDL740 DC Positive Logic Output Module: Reliable Low-Voltage Solution

The IC694MDL740 is a 12/24 Volt DC positive logic output module with a capacity of 0.5 Amps per point, offering a total of 16 output points. These points are divided into two groups of eight, each with a common power output terminal. With its positive logic characteristics, the module sources current to the loads from the user-supplied common or positive power bus. Output devices are connected between the negative power bus and the module terminals. This module is compatible with a wide range of load devices, such as motor starters, solenoids, and indicators. Power to operate the field devices must be supplied by the user.

Each output point has an individual numbered LED to display the ON/OFF status. There are no fuses on this module. The blue bands on the label indicate that the MDL740 is a low-voltage module. It can be installed in any I/O slot within an RX3i system.
Technical Specifications and Performance

    Rated Voltage: 12/24 Volts DC
    Output Voltage Range: 12 to 24 Volts DC (+20%, -15%)
    Number of Outputs: 16 (two groups of eight outputs each)
    Isolation: 250 Volts AC continuous, tested up to 1500 Volts AC
    Output Current: Maximum 0.5 Amps per point, 2 Amps maximum per group
    Inrush Current Capacity: 4.78 Amps for 10 ms
    Power Consumption: 110 mA (with all outputs on) from the 5-volt bus on the backplane
    Output Voltage Drop: 1 Volt maximum
    Off-State Leakage Current: 1 mA maximum
    On and Off Response Time: Maximum 2 ms

Wiring Connections

The terminal connections for each output are as follows:

    Terminal 1: DC +
    Terminals 2-9: Outputs 1 to 8
    Terminal 10: Common return for outputs 1-8
    Terminal 11: DC +
    Terminals 12-19: Outputs 9 to 16
    Terminal 20: Common return for outputs 9-16

Recommendations and Advice

The IC694MDL740 module provides flexible and reliable control with its low-voltage, positive logic output characteristics, making it suitable for a wide range of industrial automation applications. It is ideal for controlling motor starters, solenoids, and indicator devices. Since the module does not include internal fuses, external fuses are recommended for protection. With fast response times and low leakage current, the module offers efficient and safe operation.

In conclusion, the IC694MDL740 is a robust solution for low-voltage applications, offering long-lasting reliability and flexibility in industrial environments.

>> IC694MDL740 Output modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc Pac Output modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."