IC694MDL732

IC694MDL732 DC Positive Logic Output Module: Reliable Low-Voltage Control

The IC694MDL732 is a 12/24 Volt DC positive logic output module with a capacity of 0.5 Amps per point. This module provides one group of eight outputs with a common power output terminal. With positive logic characteristics, it sources current to the loads from the user-supplied common or positive power bus. The output device is connected between the negative power bus and the module output. This module is compatible with a wide range of load devices, such as motor starters, solenoids, and indicators. Power to operate the field devices must be supplied by the user.

Each output point has an individual numbered LED to display the ON/OFF status. There are no fuses on this module. The blue bands on the label indicate that the MDL732 is a low-voltage module. It can be installed in any I/O slot within an RX3i system.


Technical Specifications and Performance

    Input Voltage: 12/24 Volts DC
    Output Voltage Range: 12 to 24 Volts DC (+20%, -15%)
    Number of Outputs: 8 (one group)
    Isolation: 250 Volts AC continuous, tested up to 1500 Volts AC
    Output Current: Maximum 0.5 Amps per point, 2 Amps maximum per group
    Inrush Current Capacity: 4.78 Amps for 10 ms
    Power Consumption: 50 mA (with all outputs on) from the 5-volt bus on the backplane
    Output Voltage Drop: 1 Volt maximum
    Off-State Leakage Current: 1 mA maximum
    On and Off Response Time: Maximum 2 ms

Wiring Connections

The terminal connections for each output are as follows:

    Terminal 1: DC+
    Terminals 2-9: Outputs 1 to 8
    Terminal 10: Common return for outputs 1-8

Recommendations and Advice

The IC694MDL732 module provides reliable control with positive logic output characteristics, making it suitable for a wide range of applications in industrial automation systems. It is ideal for controlling devices such as motor starters and solenoids, which require higher current. As this module does not include built-in fuses, external protection should be considered to enhance safety. With its fast response times and low leakage current, it offers efficient and safe performance.

In conclusion, the IC694MDL732 is a solid choice for low-voltage applications, offering flexibility and reliability in industrial environments for long-term use.


>> IC694MDL732 Output modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL732 Output modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."