IC694MDL241

IC694MDL241: 24 VAC/VDC 16 Point Positive/Negative Logic Input Module

The IC694MDL241 is a 24 VAC/VDC input module that provides 16 input points with a common power input terminal. This module can be used with AC or DC field inputs, and in DC mode, it can be wired for either positive or negative logic. It is compatible with a wide range of input devices, such as pushbuttons, limit switches, and electronic proximity switches. When current flows into an input point, it results in a logic "1" in the input status table (%I).

Power to operate AC input devices must be supplied by the user. However, DC inputs can be powered by the backplane’s 24V supply. Sixteen green LEDs display the ON/OFF status of input points 1 through 16. The blue bands on the module label indicate that the IC694MDL241 is a low-voltage module. It can be installed in any I/O slot of an RX3i system.
Technical Specifications:

    Rated Voltage: 24 volts AC or 24 volts DC
    Input Voltage Range: 0-30 volts DC or 0-30 volts AC, 50/60 Hz
    Inputs per Module: 16 (grouped with a single common terminal)
    Isolation:
        Field to Backplane and Frame Ground: 250 VAC continuous, 1500 VAC for one minute
    Input Current: Typically 7 mA
    Input Characteristics:
        On-state Voltage: 11.5-30 volts AC or DC
        Off-state Voltage: 0-4 volts AC or DC
        On-state Current: Minimum 3.2 mA
        Off-state Current: Maximum 1 mA
        On Response Time: Typically 12 ms
        Off Response Time: Typically 28 ms
    Power Consumption:
        5V: 80 mA (with all inputs on) from the 5-volt backplane bus
        24V: 125 mA from the isolated 24V backplane bus or user-supplied power

Wiring:

    Terminals:
        Terminal 1 is the common return for inputs 1-16.
        Terminals 2-17 are for the input connections.
        Terminal 18 provides 24V DC output, and terminal 19 provides 0V output.
    Note: When the 24V OUT pin is used to connect input devices in the field, the module's isolation specification changes to: Field to Backplane and Frame Ground: 50 VAC continuous, 500 VAC for one minute.

The IC694MDL241 is a versatile 16-point input module that supports both 24 VAC and 24 VDC inputs. With the ability to handle either positive or negative logic in DC mode, it provides flexibility for various input devices and applications. This low-voltage module is an ideal solution for systems that require reliable AC or DC input handling in industrial environments.