IC694MDL240

IC694MDL240: 120 Volt AC, 16 Point Input Module

The IC694MDL240 is a 120-volt AC input module that provides 16 input points with a common power input terminal. The input circuits are reactive (resistor/capacitor) and when current flows into an input point, it results in a logic "1" in the input status table (%I). This module is compatible with a wide range of input devices such as pushbuttons, limit switches, and electronic proximity switches.

Power to operate the field devices must be supplied by the user, and this module requires an AC power source; it cannot be used with a DC power source. Sixteen green LEDs indicate the ON/OFF status of points 1 through 16. Red bands on the label indicate that the IC694MDL240 is a high-voltage module. It can be installed in any I/O slot of an RX3i system.

Technical Specifications:

    Rated Voltage: 120 volts AC
    Input Voltage Range: 0-132 volts AC, 50/60 Hz
    Inputs per Module: 16 (in a single group with a common terminal)
    Isolation:
        Field to Backplane and Frame Ground: 250 VAC continuous, 1500 VAC for one minute
    Input Current: Typically 12 mA at rated voltage
    Input Characteristics:
        On-state Voltage: 74-132 volts AC
        Off-state Voltage: 0-20 volts AC
        On-state Current: Minimum 6 mA
        Off-state Current: Maximum 2.2 mA
        On Response Time: 30 ms maximum
        Off Response Time: 45 ms maximum
    Power Consumption: 90 mA (with all inputs on) from the 5-volt backplane bus

Input Points vs. Temperature:

The number of inputs that can be ON simultaneously depends on the ambient temperature. For example:

    All 16 inputs can be on at lower temperatures, but as the temperature rises (50°C and above), the number of inputs that can be ON decreases to 9.

Wiring:

    Terminals: Terminals 1 to 16 are for the input connections, and terminal 19 is the common return for all 16 inputs.

The IC694MDL240 is a robust 120-volt AC input module offering 16 input points, ideal for high-voltage environments. It is compatible with a wide range of input devices and is designed to meet the needs of industrial applications. The user must supply power to the field devices, and this module operates exclusively on AC power.


>> IC694MDL240 input modules User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: GE Fanuc IC694MDL240 input modules and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."