IC693PWR331
IC693PWR331 Power Supply
The IC693PWR331 is a 30-watt wide-range power supply designed for 24VDC nominal inputs. It’s ideal for applications that need more +5V current than the standard supply can provide, as it allows the full 30 watts to be consumed by the +5V output. It accepts an input voltage range between 12VDC and 30VDC, but note that it requires at least 18VDC to start.
Output Voltages:
+5 VDC Output: This output can deliver up to 30 watts, powering the main system.
+24 VDC "Relay" Output: Provides power to relay modules, up to 15 watts.
Isolated +24 VDC Output: Mainly used internally by modules but can also provide external power, up to 20 watts.
Load Capacity:
The combined total load from all outputs must not exceed 30 watts. Here's the breakdown:
5V output: Can deliver up to 30 watts.
Isolated 24V output: Can deliver up to 20 watts.
Relay output: Can deliver up to 15 watts.
Make sure the total of these outputs does not exceed 30 watts.
Protection Features:
Overvoltage protection: Activates between 6.4V and 7V for the 5V output.
Overcurrent protection: The 5V output is limited to a maximum of 7A.
Startup and Input Power:
This power supply can draw up to 50 watts at full load.
During startup, it may experience a surge current of 4A for up to 100 milliseconds.
Output Voltage Ranges:
5V output: Between 5.0 VDC and 5.2 VDC (nominal is 5.1V).
24V relay output: Between 19.2 VDC and 28.8 VDC.
Isolated 24V output: Between 19.2 VDC and 28.8 VDC.
Ride-Through Time:
The power supply will continue to operate for a minimum of 10 milliseconds during brief power outages or interruptions.
Current Derating for High Temperatures:
For ambient temperatures above 50°C (122°F), you must reduce the current capacity of the 5V output, as shown in the derating curve (Figure 4-9). For example:
At 55°C, the 5V output current capacity will decrease slightly below 6.1A.
Calculating Input Power Requirements:
Determine the total output power required based on the specifications of the individual modules you’re using.
Multiply the output power by 1.5 to get the input power requirement.
Divide the input power by the operating source voltage to calculate the input current needed.
Use the lowest input voltage to determine the maximum input current required.
Allow for startup surge current.
Add a 10% to 20% margin for variations in power demand.
>> IC693PWR331 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)