12/24 Volt DC Negative Logic 0.5 Amp Output - 16 Points (IC693MDL741)

The IC693MDL741 12/24 Volt DC Negative Logic 0.5 Amp output module is designed for the Alspa C80–35 PLC system. It provides a total of 16 output points, divided into two groups. Each group has its own common power output terminal. This module features negative logic, meaning it sinks current from the loads to the user common or negative power bus. The output device is connected between the positive power bus and the module output. This characteristic makes the module compatible with a wide range of user-supplied load devices such as motor starters, solenoids, and indicators.

The power required to operate the field devices must be supplied by the user. At the top of the module, there are LED indicators that show whether each output is ON or OFF. These LEDs are arranged in two horizontal rows, with the top row labeled "A1" to "A8" (points 1 to 8) and the bottom row labeled "B1" to "B8" (points 9 to 16).

An insert is placed between the inner and outer surfaces of the hinged door. When the door is closed, the inside of the module shows circuit wiring information, and the outer surface can be used to record circuit identification details. The left edge of the insert is colored blue, indicating that this is a low-voltage module. No fuses are present in this module.

This module can be installed in any I/O slot of a 5 or 10-slot baseplate in the Alspa C80–35 PLC system.
Technical Specifications:

    Nominal Voltage: 12/24 volts DC
    Output Voltage Range: 12-24 volts DC (+20%, –15%)
    Outputs per Module: 16 (two groups, each with 8 outputs)
    Isolation: 1500 volts between field side and logic side
    Output Current: Maximum 0.5 amps per point, 2 amps maximum per common
    Output Voltage Drop: Maximum 0.5 volts
    Off-State Leakage Current: Maximum 1 mA
    On Response Time: Maximum 2 ms
    Off Response Time: Maximum 2 ms
    Power Consumption: 110 mA from 5-volt bus on the backplane (all outputs ON)

For wiring details and additional technical information, please refer to the product datasheet.

>> IC693MDL741 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc