IC693MDL646

IC693MDL646: 24 Volt DC Positive/Negative Logic Input Module

This 24 Volt DC Positive/Negative Logic Input Module is designed for use with the Series 90-30 Programmable Logic Controller. It provides 16 input points, grouped with a single common power input terminal. The module's key feature is its fast on and off response times of approximately 1 ms, making it ideal for applications requiring quick signal processing.
Key Features:

    Logic Types: The module supports both positive and negative logic. This allows flexibility in designing systems that either sink or source current through the input device.
    Input Devices: It works with a broad range of input devices such as pushbuttons, limit switches, and proximity switches.
    Logic Indication: When current flows into one of the input points, it registers as a logic 1 in the input status table (%I).
    Power Supply Options: The module can be powered either by user-supplied external power or through an Isolated +24 VDC supply provided on the PLC system's power supply unit.

LED Indicators:

    The module features two rows of LEDs, each representing eight input points. The top row is labeled A1-A8 for points 1 to 8, and the bottom row is labeled B1-B8 for points 9 to 16. These LEDs provide a visual indication of whether each input is ON or OFF.

Technical Specifications:

    Rated Voltage: 24 volts DC
    Input Voltage Range: 0 to 30 volts DC
    Number of Inputs: 16 inputs in a single group with a common terminal
    Isolation: 1500 volts between the field side and logic side
    Input Current: 7 mA (typical) at rated voltage
    On-State Voltage: 11.5 to 30 volts DC
    Off-State Voltage: 0 to 5 volts DC
    On-State Current: Minimum 3.2 mA
    Off-State Current: Maximum 1.1 mA
    Response Times:
        On: 1 ms (typical)
        Off: 1 ms (typical)
    Power Consumption:
        5V: 80 mA from the 5V bus (when all inputs are ON)
        24V: 125 mA from the isolated 24V backplane bus or from user-supplied power

Installation & Wiring:

    The module can be installed in any I/O slot within a Series 90-30 PLC system.
    A detailed wiring diagram is available to assist in connecting input devices and power sources to the module. Both positive and negative logic wiring options are supported, allowing flexibility in system design.

Field Wiring:

    The module includes detailed wiring guidance, making it easy to connect various input devices and ensure proper electrical connections.

Use Cases:

Given its fast response times and flexibility with both positive and negative logic, the IC693MDL646 module is suitable for high-speed applications that require precise control and monitoring of multiple input devices.

This module is highly versatile for various industrial control systems, offering both speed and compatibility with numerous input devices.

>> IC693MDL646 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693MDL646 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013