IC693CPU360

Ge Fanuc 90-30 PLC IC693CPU360 - Simple Guide for Electricians

Overview: The IC693CPU360 is a single-slot CPU module designed for large projects, offering high memory capacity and processing speed. It supports a total of 8 baseplates (1 CPU baseplate + 7 expansion or remote baseplates). With firmware release 9.0, the memory capacity has been increased, making it ideal for larger systems.

Key Features:

    Single-Slot CPU Module: The CPU occupies just one slot on the baseplate, leaving the other slots available for I/O or option modules.
    Expansion Support: You can connect up to 7 additional baseplates for expansion, making it perfect for large-scale projects.
    Battery-Backed Clock: This model includes a battery-backed clock, allowing it to retain time-based data even when the system is powered off.
    Built-in Serial Port: There is 1 built-in serial port that supports SNP and SNP-X slave protocols. For master or RTU support, you’ll need a CMM or PCM module.

Technical Details:

    Processor Speed: Operates at 25 MHz, providing fast and powerful performance.
    Scan Rate: It scans at 0.22 milliseconds per 1K of logic.
    User Program Memory: Starting with firmware release 9.0, it offers up to 240K bytes of program memory. Earlier versions have a fixed size of 80K bytes.
    Input/Output Points: Supports 2,048 discrete input points and 2,048 discrete output points.
    Internal Coils: Includes 4,096 bits for internal coils and 256 bits for temporary output coils.
    Analog Inputs/Outputs: Configurable up to 16,384 words for analog inputs and outputs (with firmware 9.0 and later).
    Timers/Counters: Provides more than 2,000 timers and counters, suitable for complex operations.
    Communications: Supports Ethernet, Profibus, FIP, and other communication modules, with multi-drop connection options via LAN.
    Floating Point Math Support: Firmware release 9.0 and later supports firmware-based floating-point math calculations.

Things to Watch Out For:

    Memory Storage: Supports both RAM and Flash memory. With firmware version 9.0, memory can be configured for different needs.
    Additional Modules May Be Needed: If you need SNP/SNP-X master, CCM, or RTU protocol support, you’ll need to add a CMM or PCM module.

The IC693CPU360 is a powerful CPU for large projects and complex systems. With its high memory capacity, fast processing speed, and expansion options, it’s suitable for handling demanding tasks. Its advanced communication features and battery-backed clock make it a reliable choice for extensive applications.

>> IC693CPU360 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CPU360 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."