IC693CMM311

IC693CMM311 Communications Coprocessor Module (CMM)

The Communications Coprocessor Module (CMM) is a powerful communications add-on for all Series 90-30 modular CPUs. It cannot be used with embedded CPUs like models 311, 313, or 323, but it offers excellent connectivity for larger systems. This module supports three important communication protocols:

    GE Fanuc CCM
    RTU (Modbus) Slave Protocol
    SNP Protocol

With these protocols, the CMM makes it easier to integrate your PLC with other systems and communicate data reliably.
Dual Serial Ports for Flexibility:

This module is equipped with two serial ports:

    Port 1: Supports RS-232 connections.
    Port 2: Supports either RS-232 or RS-485, depending on your needs.

You can configure the module either through the configuration software or stick with the default setup if that’s sufficient for your application.

Since both serial ports share a single connector, IC693CBL305 Wye Cable is included to split the ports into two separate connections. This makes wiring much easier and keeps things clean.
Multiple CMM Modules for Larger Systems:

In setups with a 331 or higher CPU, you can install up to four CMM modules in the CPU baseplate, giving you even more communication flexibility.
Key Features of the Module:

    High-performance communication coprocessor
    Two serial ports to handle different types of connections (RS-232 and RS-485)
    Works with multiple communication protocols to integrate with various systems
    Easy configuration with software, or use of a default setup for quick installation
    Supports up to 4 CMMs in larger CPU configurations (331 and higher)

The IC693CMM311 is a versatile and powerful communication module that helps your Series 90-30 PLC communicate with external devices. Whether you're using CCM, Modbus, or SNP protocols, this module ensures reliable and fast data transfer, making it an essential component for more advanced setups.

>> IC693CMM311 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CMM311 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."