IC693CMM301
IC693CMM301 Genius Communications Module (GCM)
The Genius Communications Module (IC693CMM301) for the Series 90-30 PLC provides global communications on a Genius Communications bus between Series 90-30 PLCs and/or other GE Fanuc PLCs. Series 90-70, Series Six, and Series Five PLCs can communicate on this bus through their respective Genius Bus Controllers.
The Genius Communications bus is a token passing peer-to-peer, noise-immune network optimized to provide high-speed transfer of real-time control data. Up to eight Series 90-30 PLC CPUs, in any combination, can communicate with each other over a single Genius I/O serial bus using a standard twisted pair, shielded cable.
Status LEDs
The LEDs on the front of the GCM module indicate its operating status:
OK: Shows the status of the GCM module. This LED turns on after power-up diagnostics are completed.
COM: Shows the status of the Genius communications bus. This LED is steadily on when the bus is operating properly, blinks for intermittent bus errors, and is off for a failed bus or when no configuration has been received from the PLC CPU.
+ IC693CMM301 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)