IC693CBL321

The IC693CBL321 cable is obsolete and has been replaced by the IC693CBL329 and IC693CBL330 cables. The IC693CBL321 is a 3 feet (1 meter) I/O cable that connects a 24-pin connector on a module to the connector on a terminal block. It is used with Terminal Block Quick Connect (TBQC) assemblies. For module lists and cable selection, see Appendix J.


IC693CBL330:

The IC693CBL330 is a 3 feet (1 meter) I/O cable with right-angle connectors on both ends. It connects the right-side 24-pin connector on a 32-point module or the single connector on a TBQC faceplate to the terminal block. This cable replaces the IC693CBL321 and is used with Terminal Block Quick Connect (TBQC) assemblies. Refer to Appendix J for additional module and cable selection information.


Function of the Cable:

These cables are used with 16-point I/O modules that are equipped with a TBQC I/O faceplate adaptor. Each cable has straight 24-pin female connectors on both ends and provides a pin-to-pin connection (e.g., Pin A1 to Pin A1, Pin A2 to Pin A2, etc.). The cables allow the module to connect to a terminal block assembly.

An I/O faceplate assembly (catalog number IC693ACC334) is required, which snaps onto the module in place of its standard 20-pin terminal block. There are five different terminal blocks available to support various I/O modules. For more details on the TBQC assemblies, see Appendix J.


Cable Specifications:

    Cable Lengths:
        IC693CBL321: 3 feet (1 meter)
        IC693CBL322: 6 feet (2 meters)
        IC693CBL323: 1.5 feet (0.5 meters)

    Cable Type: 12 twisted pairs with an overall aluminum polyester shield and a #24 AWG drain wire.

    24-pin Female Connectors: Equivalent to Fujitsu FCN-363J024 or equivalent.

The connectors are arranged on the I/O faceplate with rows labeled A1-A12 and B1-B12. A1 and B1 are located at the top of the module faceplate.

+  IC693CBL321 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL321 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."