IC693CBL315
The IC693CBL315 was a 10 feet (3 meter) long I/O interface cable designed for use with high-density (32-point) I/O modules in the Series 90-30 PLC system. It connected to one of the 24-pin connectors on the module, with stripped, tinned, and labeled leads on the other end. However, this cable has been obsolete since late 1998 and has been replaced by the IC693CBL327 and IC693CBL328 cables, which have right-angle connectors to reduce the clearance space in front of the PLC.
Supported Modules:
IC693MDL654
IC693MDL655
IC693MDL752
IC693MDL753
These modules all have dual 24-pin connectors that require two cables per module.
Function of the Cable:
This prewired cable is specifically designed for Series 90-30 high-density I/O modules that utilize the Fujitsu 24-pin user I/O connector. Each of the modules has two 24-pin connectors mounted side-by-side. The I/O interface cable connects to the module with a 24-pin connector on one end, and on the other end, the wires are stripped and tinned for direct connection.
The right connector on the module handles Groups A and B.
The left connector handles Groups C and D.
Replacement Information:
The IC693CBL315 cable was replaced by IC693CBL327 and IC693CBL328 due to the introduction of right-angle connectors. These new cables require less clearance space, making them more suitable for applications where space is limited.
Wire Pairing and Color Coding:
Here’s the wire pairing and color coding as outlined in the table:
Pin Number (A Row) Pair # Wire Color
A1 1 Black
A2 1 White
A3 2 Brown
A4 2 White
A5 3 Red
A6 3 White
A7 4 Orange
A8 4 White
A9 5 Yellow
A10 5 White
A11 6 Green
A12 6 White
Pin Number (B Row) Pair # Wire Color
B1 7 Blue
B2 7 White
B3 8 Violet
B4 8 White
B5 9 Gray
B6 9 White
B7 10 Brown
B8 10 Black
B9 11 Red
B10 11 Black
B11 12 Orange
B12 12 Black
Note on Wire Identification:
For proper identification, each pair of wires should be tied together with heat shrink tubing. For example, Pair #1 (Black and White wires) connecting to Pins A1 and A2 should be bound together.
Additional Information:
The IC693CBL327 and IC693CBL328 cables replaced the IC693CBL315 and IC693CBL310 cables. These newer versions, with their right-angle connectors, allow for more compact installations where space is limited in front of the PLC.
+ IC693CBL315 User manual (pdf)
>> Ge fanuc 90-30 User manual (pdf)
----------
+ Ge-Fanuc Contact (for Automation Mall)