IC693CBL306

The IC693CBL306 is a 3 feet (1 meter) long extension cable used to connect between the 50-pin connector on the module faceplate and a terminal block. This cable is designed for high-density (32-point) I/O modules that have a single 50-pin connector, including:

    IC693MDL652
    IC693MDL653
    IC693MDL750
    IC693MDL751

Function of the Cable:

The IC693CBL306 extension cable is used with 32-point high-density modules that have a 50-pin male Honda connector mounted on the front of the module. The cable has a 50-pin male connector on one end and a 50-pin female connector on the other. This provides a pin-to-pin connection (i.e., pin 1 to pin 1, pin 2 to pin 2, etc.) from the module to a DIN-rail-mounted terminal block assembly.

The connector on the module is oriented with the notch at the top, and pin 1 is at the top of the right row of pins when viewed from the front.


Cable Specifications:

    Cable Length:
        IC693CBL306: 3 feet (1 meter)
        IC693CBL307: 6 feet (2 meters)
    Connectors:
        50-pin female Honda connector on the end that connects to the module's male connector.
        50-pin male connector on the end that connects to the connector interface assembly.

Recommended Terminal Block:

For connecting field wiring to the 50-pin high-density I/O modules, a Weidmuller RS-MR 50 B terminal block assembly (catalog number 912263, with a female Honda connector) is recommended. This provides a convenient method for terminating field wiring to the modules.


Connection Methods for Modules with Single 50-Pin Connector:

You have three options for connecting these modules:

    Use an extension cable (like IC693CBL306 or IC693CBL307) to connect the module to a Weidmuller #912263 terminal block.
    Use an interface cable (such as IC693CBL308 or IC693CBL309) to connect the module to a user-supplied terminal block or I/O field devices. These cables have a 50-pin connector on one end and stripped, tinned leads on the other, allowing connection to terminal blocks or devices.
    Build a custom-length cable if you need a cable longer than 6 feet (2 meters). The IC693CBL308/309 datasheet in Chapter 10 provides pin-out details for this purpose.

Additional Connection Methods:

    For discrete I/O modules with 16 points or fewer, the standard method is to use the removable terminal board that comes with the modules. This allows for prewiring and easier module replacement.
    For older 32-point I/O modules, a single 50-pin connector is used, which can be connected to a Weidmuller terminal block or a user-supplied terminal block via a cable with stripped, tinned leads.
    Newer 32-point I/O modules have two 24-pin connectors on the front. These can be wired using IC693CBL327/328 cables or Terminal Block Quick Connect (TBQC) assemblies.

The IC693CBL306 extension cable provides a reliable and straightforward connection from high-density I/O modules to terminal blocks. Its pin-to-pin wiring ensures that field wiring is securely and efficiently connected to the PLC system.

+  IC693CBL306 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693CBL306 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."