IC693BEM321

IC693BEM321 I/O LINK Master Module - Series 90-30 PLC

Overview: The IC693BEM321 I/O LINK Master Module allows a Series 90-30 PLC to function as a master on a proprietary Fanuc I/O LINK. The Fanuc I/O LINK is a high-speed serial interface that enables the exchange of I/O data between the master and up to 16 slave devices. The master can receive up to 1024 discrete inputs from the slaves and send up to 1024 discrete outputs to them.

Features:

    Master-Slave Communication: The module allows high-speed I/O data exchange between the master PLC and connected slave devices. It supports up to 16 slave devices per I/O LINK.
    I/O Capacity: The module can handle 1024 discrete inputs and 1024 discrete outputs, providing substantial flexibility for large-scale industrial applications.

Usage Example: An I/O LINK system can consist of a Series 90-30 PLC used as a master, with additional devices acting as slaves. These slaves could be devices such as Power Mate CNC, Series 90-70 PLC, Series 90-30 PLC, Fanuc Series 0 CNC, or Fanuc Operator Panels. The illustration below shows a simple configuration:

Configuration and Installation:

    The I/O LINK Master Module can be configured using the Series 90-30 Hand-Held Programmer (HHP) or through software like VersaPro or Logicmaster 90-30.
    Any number of I/O LINK Master Modules can be installed in a Series 90-30 PLC, but each module must be on a separate I/O LINK.
    Up to six I/O LINK Master Modules can be installed in the CPU baseplate, and the module can be placed in any I/O slot in any baseplate.

Restart Pushbutton: A Restart Pushbutton is included on the front of the module, which provides a quick way to restart the operation of the I/O LINK in case of a failure.

Serial Port: The module has a 20-pin Honda-type connector for connection to the first slave on the I/O LINK. The signal levels are RS422/485 compatible, ensuring reliable communication.

Compatibility:

    Host CPU Compatibility:
        Compatible with Series 90-30 CPU models 311, 313, 321, 323, 331, and 341 with release 4.4 or later, and all versions of CPU models 350, 351, 352, 360, 363, and 364.

    Programmer Compatibility:
        Supports Hand-Held Programmer (HHP).
        Compatible with Logicmaster 90-30 Programming Software (release 4.5 or later), VersaPro Software, Control Programming Software (Version 2.0 or later), and Logic Developer-PLC software.

    Slave Unit Compatibility:
        Supports Power Mate models A, C, D, and E.
        Compatible with Series 0 CNC, Fanuc Operator Panel Unit, Fanuc Connection Unit 1 & 2, and Series 90-30 and 90-70 PLCs with I/O LINK Interface Modules configured as slaves.

>> IC693BEM321 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693BEM321 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."