IC693APU302

IC693APU302 Motion Mate Axis Positioning Module (APM)

The IC693APU302 Motion Mate Axis Positioning Module is a fully integrated, 2-axis motion control module for Series 90-30 PLCs. This module combines high-performance motion control and PLC logic in one system, making it ideal for precision applications.

    Operating Modes:
        Standard Mode: Combines high-performance motion control with PLC logic solving functions for a smooth and efficient operation.
        Follower Mode: Provides high-performance "electronic gearing" for continuous master/slave applications, perfect for synchronized movements.

Programming?
The APM can be configured using the Logicmaster 90-30 Configuration software, where you can easily select the desired mode and configure other parameters.

APM and PLC Integration
The APM and Series 90-30 PLC work together as a fully integrated motion control package. The APM handles axis movement and manages communications with the drive and machine, while the PLC transfers data to and from the APM. Additionally, the PLC enables the connection of operator interfaces for control and monitoring of the system.

The APM can be installed in any Series 90-30 CPU (expansion or remote baseplate).

    Embedded CPUs (311, 313, 323): You can use up to 3 APM modules.
    Modular CPUs (331 or higher): Up to 8 APM modules can be used in one system, with a maximum of 3 per baseplate.

Configuration Software:

    The APM can be configured using Logicmaster 90-30 or VersaPro software.
    With the Motion Programmer software, you can create and store up to 10 motion programs directly in the APM.

APM Connections
The APM faceplate includes two 24-pin high-density connectors:

    Connector A: Used for Axis 1 connections.
    Connector B: For Axis 2 on 2-axis APMs, and general-purpose connections on both 1-axis and 2-axis models.

These high-density connectors are typically connected to a terminal block via a short cable for easier wiring.

APM Cables
Available cables for the APM include:

    IC693CBL311: 10 feet/3 meters
    IC693CBL319: 3 feet/1 meter
    IC693CBL317: 10 feet/3 meters with 8-inch external shield pigtail
    IC693CBL320: 3 feet/1 meter with 8-inch external shield pigtail

If you need custom-length cables, 24-pin I/O cable connector kits are available. The terminal block is Weidmuller RD25 910648 or an equivalent that is compatible with the I/O cables IC693CBL311/319/317/320.


+  IC693APU302 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693APU302 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."