IC693APU301

IC693APU301 Motion Mate Axis Positioning Module (APM)

The IC693APU301 Motion Mate Axis Positioning Module is a high-performance, easy-to-use motion control module designed for Series 90-30 PLCs. Available in both 1-axis (IC693APU301) and 2-axis (IC693APU302) configurations, this module combines motion control and PLC logic into a single integrated system.

Operating Modes
    Standard Mode: High-performance motion control integrated with PLC logic solving functions for efficient system control.
    Follower Mode: Provides electronic gearing, ideal for master/slave continuous motion control applications.

Programming Software
The APM can be configured using Logicmaster 90-30 or VersaPro software, making it easy to adjust settings and create custom programs for your system.

APM and PLC Integration
The APM and Series 90-30 PLC work together seamlessly. The APM handles axis motion and communication with the drives, while the PLC transfers data and connects operator interfaces for monitoring and control of the system.

APM Module Installation
    The APM can be installed in any Series 90-30 CPU, expansion, or remote baseplate.
    Embedded CPUs (311, 313, 323): Support up to 3 APM modules.
    Modular CPUs (331 or higher): Support up to 8 APM modules per system, with a maximum of 3 per baseplate.

Software Capabilities
With Motion Programmer software, you can store up to 10 motion programs directly in the APM. This allows for versatile and flexible control over motion processes.

APM Connections
The APM has two 24-pin high-density connectors:
    Connector A: Handles connections for Axis 1.
    Connector B: For 1-axis APMs, it is used for general-purpose connections. For 2-axis APMs, it handles Axis 2 and additional general-purpose connections.

APM Cables
Available cables for APM include:
    IC693CBL311: 10 feet/3 meters
    IC693CBL319: 3 feet/1 meter
    IC693CBL317: 10 feet/3 meters with 8-inch external shield pigtail
    IC693CBL320: 3 feet/1 meter with 8-inch external shield pigtail

For custom-length cables, 24-pin I/O cable connector kits are available, including solder eyelet, crimp wire, and IDC (ribbon) receptacle options. Terminal blocks should be compatible with the cables, such as the Weidmuller RD25 910648 or equivalent.



+  IC693APU301 User manual (pdf)

>> Ge fanuc 90-30 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693APU301 and other Ge-Fanuc modules are available for sale at Otomasyon Mall. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013 

"Please note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please do not hesitate to share them with us."