IC693ACC300

IC693ACC300: Input Simulator, 8/16 Point

The IC693ACC300 Input Simulator module is a handy tool for Series 90-30 Programmable Logic Controllers (PLCs). It features 16 two-position switches on its front panel, each of which can be programmed as a discrete input device. This module allows you to simulate either 8-point or 16-point input modules, making it useful for both program development and system debugging.
Key Features:

   Switch Configuration: The mode switch at the back of the module lets you choose between 8-point or 16-point simulation. In 8-point mode, only the first 8 switches are functional, while in 16-point mode, all 16 switches can be used.
   Input Simulation: When a switch is in the ON position, it registers a logic 1 in the input table (%I).
   No Field Wiring Required: Unlike actual input modules, the Input Simulator doesn't need any field wiring, which simplifies testing and debugging.
   LED Indicators: There are two rows of green LEDs corresponding to the position of each switch. When a switch is turned ON, the corresponding LED lights up. The top row is labeled A1 to A8, and the bottom row is labeled B1 to B8.

Why Use It?

This module is a valuable tool for:

   Program Development: The Input Simulator allows you to test and develop programs without needing actual field devices. This means you can simulate inputs and verify your program logic without connecting real sensors or switches.
   Troubleshooting: The module can be substituted for real inputs to help diagnose and fix system problems.
   Manual Control: Once installed, it can remain in the system to provide up to 16 manual input contacts for controlling output devices, making it versatile for manual control during system testing.

Specifications:

   Inputs per Module: 8 or 16 (user-selectable with the switch)
   On Response Time: 30 milliseconds maximum
   Off Response Time: 20 milliseconds maximum
   Internal Power Consumption: 120 mA (when all inputs are ON) from the 5V bus on the backplane.

Installation:

This module can be installed in any I/O slot of a 5 or 10-slot baseplate within a Series 90-30 PLC system. All you need to do is set the mode switch (on the back) to either 8 or 16 points and place the module into the selected slot.
Applications:

   Debugging and Program Testing: The Input Simulator is perfect for replicating input signals and testing system responses without needing to connect actual devices like pushbuttons or switches.
   Manual Overrides: In certain situations, the module can be left in the system to manually simulate conditions that would trigger specific outputs.

In summary, the IC693ACC300 is an essential tool for developing, troubleshooting, and manually controlling programmable logic controllers, offering flexibility and ease of use with its simple switch-based input simulation.

>> IC693ACC300 User manual (pdf)

++ Other 90-30 PLC modules

----------

+ Ge-Fanuc 2 Homepage

+ Ge-Fanuc Contact (for Automation Mall)

+ About Ge-Fanuc

Reminder: IC693ACC300 and other Ge-Fanuc modules are available for sale at Otomasyon AVM. Please note that some of the devices are used products, so take this into consideration when purchasing. However, once products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. 06.03.2013