QuickPanel View
On View panels, Basic, Intermediate or Loaded configuration and front-panel option matter as much as screen size. Similar IC754 codes do not guarantee the same licence or I/O hardware.
IC754V[S/B/G/K]L06MTD is a documented monochrome pattern, while IC754V[S/B/G/K]L06CTD describes a TFT class. Bracket notation is not one orderable code; read the complete device label.
The middle of an IC754 designation identifies display and hardware options that affect the HMI project. Similar diagonal size can hide different ports or runtime requirements. Capture the label, project target and physical PLC connection before replacement.
Selection details that matter
Compare the Proficy View Machine Edition project, ports and full IC754 code.
QuickPanel View model characteristics
Exact-model example – IC754VGB06MTD: A Basic monochrome, thin-bezel unit with an approximately 5.75-inch, 320 × 240 display. The GE Fanuc GFK-2328B guide describes one COM1 serial port and Ethernet connectivity and specifies a 24 V DC, 24 W supply for setup. These figures apply to this complete model code, not to every IC754V variant.
IC754V[S/B/G/K]L06MTD: Loaded configuration; 6-inch class monochrome display.
IC754V[S/B/G/K]L06CTD: Loaded configuration; 6-inch class TFT.
IC754V[S/B/G/K]F08CTD: Loaded configuration; 8-inch class TFT.
IC754V[S/B/G/K]F12CTD: Loaded configuration; 12-inch class TFT.
IC754V[S/B/G/K]F15CTD: Loaded configuration; 15-inch class TFT.
IC754V[S/B/G/K]I06MTD: Intermediate configuration; 6-inch class monochrome display.
IC754V[S/B/G/K]I06STD: Intermediate configuration; 6-inch class STN.
IC754V[S/B/G/K]I08CTD: Intermediate configuration; 8-inch class TFT.
IC754V[S/B/G/K]I12MTD: Intermediate configuration; 12-inch class monochrome display.
IC754V[S/B/G/K]I12CTD: Intermediate configuration; 12-inch class TFT.
IC754V[S/B/G/K]B06MTD: Basic configuration; 6-inch class monochrome display.
IC754V[S/B/G/K]B06CTD: Basic configuration; 6-inch class TFT.
Bracketed codes cover several front-panel variants, not single orderable SKUs. Check serial/Ethernet/USB port counts and supply values for other variants against their own exact-model manuals.
Software and project backup
Panels use Proficy View Machine Edition and related Machine Edition components. Select the View, Control or Plus project target explicitly, then check licence, runtime and hardware revision. QuickPanel View requires the project target to match the complete hardware designation.
For the backup and version requirements of QuickPanel View, read Proficy View Machine Edition for QuickPanel HMI.
Finding the applicable manual
QuickPanel View: Describes display hardware; select the copy using the complete IC754 code. Relevant document reference: GFA-1063B; GFK-2325.
The document scope and future PDF location for QuickPanel View are explained in GE-Fanuc HMI and Operator Panel Manuals.
Relevant model codes
Operator panel: IC754V[S/B/G/K]L06MTD, IC754V[S/B/G/K]L06CTD, IC754V[S/B/G/K]F08CTD, IC754V[S/B/G/K]F12CTD, IC754V[S/B/G/K]F15CTD, IC754V[S/B/G/K]I06MTD, IC754V[S/B/G/K]I06STD, IC754V[S/B/G/K]I08CTD, IC754V[S/B/G/K]I12MTD, IC754V[S/B/G/K]I12CTD, IC754V[S/B/G/K]B06MTD, IC754V[S/B/G/K]B06CTD.
Where to go next
Classic QuickPanel and QuickPanel View Connections and Accessories explain the adjacent parts of this system without treating them as interchangeable.
Explore GE-Fanuc products
After reading about QuickPanel View, you can browse the available listings in the GE-Fanuc second-hand main category. Check each product page for its current availability and condition.