Gemo LT102-230VAC-R cooling controller

- Gemo control products have been sold in our company since 2013.

- 37*72 mounting dimensions and 220v supply (24 volts must be specified in the order)
- With 2 relay outputs (SSR output must be specified in the order)

-50..+150oC, PTC Sensor Input, ON/OFF, Heating/Cooling function, “Offset” adjustable, Alarm and Heat output, absolute, relative or “sensor failure” alarm selection, Delay feature for cooling output, Adjustable in case of sensor failure double contact temperature controller with output capability
PTC-6H-SLK -50..+150oC, 1.5 m. PTC Weather Sensor with silicon cable (for LT102)
PTC-6S-SLK -50..+150oC, 1.5 m. Liquid Sensor with PTC Fitting with silicon cable (for LT102)

- Double contact temperature controller
- Sensor type: PTC - S
- ON-OFF control form -
- High precision, accuracy
- Ability to keep program and control parameters in memory
- Easy connection with socket terminal
- Measuring range: -50 C ... +150 C
- Optional Heating and Cooling function
- Possibility to select upper limit for Set and Alarm values
- Possibility to select upper limit for Set and Alarm values
- Ability to set hysteresis separately for Set and Alarm values
- Possibility to select relative, absolute or “Sensor failure” alarm types
- Built-in adjustable delay timer before commissioning for cooling function
(compressor protection feature)

- Adjustable built-in ON/OFF timer for OUT output in case of sensor failure (for heating function and cooling function)
- Possibility to add "Offset" to the measurement value
- Curve correction with stored C/Ohm conversion tables in memory
- password protected
Working Temperature: 0 .. 50 C
- Working altitude: <2000m
- Protection: If the sensor or sensor line is broken, out of measuring range or input measurement fails
- OUT output, respectively, first to Tof OFF, then to Ton
- It turns ON. If alarm type SnS is selected, sensor or sensor line is broken, measuring scale is out of range or input measurement
fails, it is ON under normal measuring conditions.
- It can work easily with inverter (for motor control) devices in the panel.

- ALARM Hysteresis: 1 ..20 C (adjustable)
- Supply Voltage: 100..240VAC, 50 - 60Hz
- Power Consumption: < 6VA

- Gemo LT102 User Manual -

+ Gemo Price list

+ Gemo Contact

++ Gemo electronic main page

+ Control devices main page  

---------